Contact Platform Support
Help CenterPool Solar Water Heater: Split Solar System Without Heat Exchanger
Related Products
-
Solar Hot Water Tank: Split Solar System With Double Heat ExchangersNegotiableMOQ: 1 Set -
Solar Hot Water Tank: Integrated & Pressurized Solar Water Heater With Porcelain Enamel Inner TankNegotiableMOQ: 3 Sets
-
Solar Hot Water Tank: Split Pressurized Solar Water Heater With Single Heat Exchanger, SKI-SBNegotiableMOQ: 1 Set
-
Solar Hot Water Tank: Split Solar System Without Heat ExchangerNegotiableMOQ: 1 Set
-
Solar Water Heating Panel: Integrated & Pressurized Solar Water Heater With Porcelain Enamel Inner TankNegotiableMOQ: 3 Sets
Specifications
Energy-efficient and GreenSolar water heater--Solar split system without copper coil--SKI-SA (ISO&CE certificated)
Product description:
SKI-SA contains three main parts: Solar Collector, Working Station and Water Tank. The solar collector installed on roof or wall. The tank can be put anywhere of the house, so the whole system is harmonious with the building. The heat was transferred from solar collector to the tank by controller. High efficiency and cost save. And if the sunshine is not enough, the user can apply to electric heating element for back up. Even if in cloudy or rainy day, the user can enjoy hot water. It is ensured that when using heat pipes no water goes into the tube and there are no incrustation, no bursting. Moreover, water can go upward at anytime.
Working Principle:
When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically. The circulation pump makes hot water circulate. The hot water into the tank and the cold water goes to the solar collector. When the temperature difference between solar collector and tank doesn’t reach the set value, the circulation pump will be shut automatically. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically. As shown in Fig-1.
Specifications:
Inner tank: Titanium Steel, thickness: 2mm and Enamel Coating, thickness: 0.5mm.
Outer tank: Colored Steel Sheet thickness: 0.5 mm
Tank Include: 1.5kw or 2.5kw Electric Heating Element, T&P Valve, Mg Anode, sensor.
Tank Capacity: 80 L to 500 L
Working Pressure: 0.6 Mpa
Vacuum tube: Heat Pipe.
Vacuum tube model: 58mm×1800mm
Frame: Adopt galvanized steel. Thickness:1.5mm.
Accessories: Circulating Pump, Solar Controller
advantage of porcelain enamel tank:
1. Excellent working condition & longer service life: no leakage, rust-free, high strength and strong resistance to corrosion
2. Clean energy and green product: no poisonous metal such as plumbum, hydrargyrum and chromium, bring health to your life;
3. Blue-Gold Titanium steel is insulated and can help preserve heat.
Enamel Tank
Certifications:
Send Inquiry to This Supplier
You May Also Like
-
Indirect Enameled 150L 300L High Pressure Solar Water Heater Flat Plate With High Efficiency and CE, Keymark CertificatesNegotiableMOQ: 50 Sets
-
Flat Panel Solar Water Heater | High Efficient Solar Water Heater)US$ 598.34 - 850.97MOQ: 1 Set
-
Hot Sales Heater System of Car SwitchUS$ 0.1 - 20MOQ: 1 Piece
-
Solar Water HeaterNegotiableMOQ: 1000 Sets
-
Solar Water Heater Hot Sales Cheap Price High Quality Rooftop Solar Water HeaterNegotiableMOQ: 1 Piece
-
MR-A568-2 Brass Special Hot Spring Water Heater 1/2US$ 2.1 - 7.1MOQ: 10 Pieces
-
150l Solar Water HeaterUS$ 1,000 - 3,500MOQ: 1 Ton
-
High Quality Pre Heated Solar Heater 18tubesUS$ 133 - 133MOQ: 100 Sets
-
High Quality 100 l Vacuum Tube Solar Water Heater With Good PriceUS$ 100 - 150MOQ: 1 Set
-
Factory Direct Sale Water Storage Tank 1000 Liter Vertical Stainless Steel Storage Tank Diesel Fuel Oil Storage TankUS$ 500 - 600MOQ: 5 Pieces
