Contact Platform Support
Help CenterSplit Solar System Without Heat Exchanger
Related Products
-
Split Pressurized Solar System Without Heat ExchangerNegotiableMOQ: 1 Set -
Solar Water Heater: Solar Split System With Solar Flat Plate Collector & Enamel Tank, SKI-SBF, ISO & CENegotiableMOQ: 1 Set
-
Solar Water Heater: Solar Split System With Solar Flat Plate Collector & Enamel Tank, SKI-SBF, ISO & CENegotiableMOQ: 1 Set
-
Solar Collector: Split Pressurized Solar Water Heater With Single Heat Exchanger, SKI-SBNegotiableMOQ: 1 Set
-
Diy Solar: Split Pressurized Solar Water Heater With Single Heat Exchanger, SKI-SBNegotiableMOQ: 1 Set
Product description:
Solar split system contains three main parts: Solar Collector, Working Station and Water Tank. The solar collector installed on roof or wall. The tank contains double copper coil, and it can be put anywhere as you want, so the whole system is harmonious with the building. The heat was transferred from solar collector to the tank by controller. The system not only heats the water with solar energy but can use other energy. High efficiency and cost save. And if the sunshine is not enough, the user can apply to electric heating element for back up. Even if in cloudy or rainy day, the user can enjoy hot water. It is ensured that when using heat pipes no water goes into the tube and there are no incrustation, no bursting. Moreover, water can go upward at anytime.
Working Principle:
When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically. The circulation pump makes heat-conducting liquid circulate. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank. When the temperature difference between solar collector and tank doesn’t reach the set value, the circulation pump will be shut automatically. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically.
Specifications:
Inner tank: Titanium Steel, thickness: 2mm and Enamel Coating, thickness: 0.5mm.
Outer tank: Colored Steel Sheet thickness: 0.5 mm
Tank Include: 1.5kw or 2.5kw Electric Heating Element, T&P Valve, Mg Anode, sensor, Copper coil (optional).
Tank Capacity: 100L to 500 L
Working Pressure: 0.6 Mpa
Vacuum tube: Heat Pipe.
Vacuum tube model: 58mm×1800mm
Frame: Adopt galvanized steel. Thickness: 1.5mm.
Accessories: Solar Work Station.
Send Inquiry to This Supplier
You May Also Like
-
Indirect Enameled 150L 300L High Pressure Solar Water Heater Flat Plate With High Efficiency and CE, Keymark CertificatesNegotiableMOQ: 50 Sets
-
Flat Panel Solar Water Heater | High Efficient Solar Water Heater)US$ 598.34 - 850.97MOQ: 1 Set
-
Hot Sales Heater System of Car SwitchUS$ 0.1 - 20MOQ: 1 Piece
-
Solar Water Heater Hot Sales Cheap Price High Quality Rooftop Solar Water HeaterNegotiableMOQ: 1 Piece
-
MR-A568-2 Brass Special Hot Spring Water Heater 1/2US$ 2.1 - 7.1MOQ: 10 Pieces
-
150l Solar Water HeaterUS$ 1,000 - 3,500MOQ: 1 Ton
-
High Quality Pre Heated Solar Heater 18tubesUS$ 133 - 133MOQ: 100 Sets
-
High Quality 100 l Vacuum Tube Solar Water Heater With Good PriceUS$ 100 - 150MOQ: 1 Set
-
Factory Direct Sale Water Storage Tank 1000 Liter Vertical Stainless Steel Storage Tank Diesel Fuel Oil Storage TankUS$ 500 - 600MOQ: 5 Pieces
-
Indirect Hot Water Split Hybrid Solar Water Heater Dual Coil Price Water Reserve TankUS$ 100 - 2000MOQ: 1 Piece
