Home > Consumer Electronics > Water Heater & Components > Solar Water Heater > Expansion Vessel Solar Water Heater

Expansion Vessel Solar Water Heater

Expansion Vessel Solar Water Heater photo-1
Expansion Vessel Solar Water Heater photo-2
Expansion Vessel Solar Water Heater photo-3
US$ 500 - 1,500 MOQ: 1 Set
Key Specifications
Get Latest Price
Type:
Evacuated Tube
Pressure:
Pressurized
Circulation Type:
Indirect / Closed Loop (Active)
Payment & Shipping
Payment Methods:
Port of Shipment:
Shanghai China
Delivery Detail:
Delivery time depends on order quantity.
Type Evacuated Tube
Pressure Pressurized
Circulation Type Indirect / Closed Loop (Active)
Heating System Thermosyphon (Passive)
Connection Type Direct-Plug
Installation Freestanding
Housing Material Other, color steel
Certification CE, Other, CE, ISO
Capacity 300
Place of Origin Jiangsu, China
Brand Name SKI SOLAR OR OEM
Model Number SKI-SC

Expansion Vessel Solar Water Heater

 

Product Description

 

 

 Expansion Vessel Solar Water Heater

 

Inner tank material titanium steel 2mm and enamel coating 0.5mm
Outer tank material

Colored Steel Sheet thickness: 0.5 mm

Tank Include 1.5kw or 2.5kw Electric Heating Element, T&P Valve, Mg Anode,sensor.
Insulation layer 55mm,heat preservation 100 hours
Frame and frame angle aluminum alloy
Vacuum tube Heat Pipe
Vacuum tube mode 58mm×1800mm
Tank Capacity 150L-500L
Working pressure  0.6 Mpa
warrenty period 5 years
Needed accessories Circulating Pump, Solar Controller
Lowest working temperature -50degree
Model Heat pipe Tank Capacity Pressure water tank
Diameter Length Number Inner thickness (mm) Outer size (mm)
SKI-SC 58/1800-18 ø58mm 1800mm 18 150L 1.2 φ470x1450
SKI-SC 58/1800-24 ø58mm 1800mm 24 200L 1.5 φ550x1340
SKI-SC 58/1800-36 ø58mm 1800mm 36 300L 1.5 φ580x1700
SKI-SC 58/1800-48 ø58mm 1800mm 48 400L 2.0 φ700x1560
SKI-SC 58/1800-60 ø58mm 1800mm 60 500L 2.0 φ700x1890

 

 

 

Expansion Vessel Solar Water HeaterExpansion Vessel Solar Water HeaterExpansion Vessel Solar Water HeaterExpansion Vessel Solar Water Heater 

 

Hot Sale Area

 

 

 

Expansion Vessel Solar Water Heater

 

 

Notes and Caution

 

 

   Matters concerning maintenance
  In order to enjoy convenient bathing experience,we suggest the following ways to maintain the produsts you buy to ensure longer service life:
  1)It is better to open drain regularly (once a month) to let dirty material flow out from porcelain enamel tank to purify water quality and avoid scale inside the porcelain enamel tank,thus increases its service life.Before you do this,please make sure that the handle of the T&P valve is open.
  2)It is suggested that you turn the handle of T&P valve on and off once a week to let the pressure out of system and ensure the normal working condition,especially for customers from South Africa.If you are off homefor 5 or more days,then you may ask your friends to help you with that.
  3)We also suggest you to connect one pipe to T&P valve,because if it releases pressure,hot water may drop.Also because of the pipe you can check if the system works normally,if there is water going down inside the pipe,then the system works properly.If no water dripping there for several days,then you need to confirm wether pipeline is stagnated.
  4)Before using our solar water heater,please do turn off the electricity (for the electric heater).
  5)Don't worry if several glass vacuum tubes break,as there is no water runnning inside enamel tank&glass vacuum tubes,it won't influence the system from working.
Warnings
  1.Keep away from live electrical circuits.
  2.Glass Vacuum tubes are easily broken,so please be careful when installation;
  3.Tank is to be completely filled with water and all air is to be vented before energizing;
  4.Due to the rigors of transportation,all connections should be checked for tightness before heater is placted to operation.
  5.Generalized instructions and procedure cannot anticipate all situations.Only qualified installers should perform the installations.
  6.Pressure relief valve must be installed in tapping provided.You can push the handle on the valve open before allowing water in,after seeing water flowing out from the valve(system fully filled with water),please press the handle down.
  7.You should not turn the ball valve off when you use the solar water heater,if you apply such a valve in inlet pipeline.
Expansion Vessel Solar Water Heater

 

 

Certificates

 

 

 

Expansion Vessel Solar Water Heater

 

 

Our Services

 

 

 

 

 

 Expansion Vessel Solar Water Heater

 

Production process

 

 Expansion Vessel Solar Water HeaterExpansion Vessel Solar Water Heater

FAQ

 

 

 

1- What is your Delivery Time?
   LCL order:7-10days.
   Full container order:15-20days.
2- What is your Guarantee Time?
    3years; Provide you with some accessories,
3- Can you accept OEM and ODM ?
    YES, printing your LOGO on the package.
4- What is your payment term?
    We accept T/T or L/C.
5-What is your MOQ?
   1 sets
6-How do you pack?
   LCL order in plywood case
   Full container order in high quality export carton
7-What is your FOB port?
   Shanghai port.
8.-What is your monthly production capacity?
   1000 sets
9-What is your shipping term?
   By sea/Air/Rail/Truck
10-Do you any additional services?
   YES!
   We offer free spares according to your order quantity. Such as Vacuum Tube, tube holders, dusting rings, silicon rings,  screws etc.
   And we can offer logo design, Products Advertising Design etc services free.

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
2007
Factory Size
5,000-10,000 square meters
Total Employees
11 - 50 People

Recommended Categories

Explore top categories and find suppliers for your specific needs