Contact Platform Support
Help CenterVIT Dust Resistant Waterproof Paint
Related Products
-
VIT Waterproof Interior Wall Latex Paint for SchoolNegotiableMOQ: 2000 Kilograms -
VIT Waterproof Interior/exterior Wall Latex Paint for HotelNegotiableMOQ: 2000 Kilograms
-
VIT Waterproof Interior/exterior Wall Latex Paint (Made in China)NegotiableMOQ: 2000 Kilograms
-
VIT Anti Yellowing Heat Resistant PaintNegotiableMOQ: 1000 Kilograms
-
VIT Air Purify Heat Resistant PaintNegotiableMOQ: 1000 Kilograms
Specifications
VIT dust resistant waterproof paint:1. Effectively waterproof paint
2. High elongation rate
3. Good adhesi
VIT dust resistant waterproof paint | |
Features |
1. Effectively waterproof 2. High elongation rate 3. Good adhesion
|
Use |
Waterproofing work for interior and exterior wall
|
Application method |
Roll & brush painting
|
Technical parameter |
Ratio: paint : water = 10 : ≤ 3 Dry to touch: ≥ 120 mins
|
Packaging |
18L
|
|
Construction process
|
1. Levelling of the surface 2. Mending cracks priorly 3. Clean the surface 4. 1st coating Recoat time > 4hrs 5. 2nd coating Recoat time > 4hrs 6. 3rd coating Recoat time > 4hrs 7. Give it a protective coat
|
Recommended construction process:
A First-class waterproof (2 cloth & 5 coat):
1. Thin the paint with the same weight of water
2. Apply a thin coat on the surface(1st coat)
3. Lay a fiberglass cloth(8mm x 8mm) closely on the first coat(1st cloth)
4. Thin the paint with water by 10:4
5. 2nd coiat
6. Lay a fiberglass cloth (2nd cloth)
7. 3rd coat
8. Thin the paint with water by 10:1
9. 4th coat and 5th coat(Note: the qualified thickness is 2mm)
B Second-class waterproof (1 cloth & 4 coat)
1. Thin the paint with the same weight of water(1:1)
2. Apply a thin coat on the surface(1st coat)
3. Lay a fiberglass cloth(8mm x 8mm) closely on the first coat(1st cloth)
4. Thin the paint with water by 10:4
5. 2nd coiat
6. Thin the paint with water by 10:1
7. 4th coat and 5th coat(Note: the qualified thickness is 2mm)
C Third-class waterproof (1 cloth & 3 coat)
1. Thin the paint with the same weight of water(1:1)
2. Apply a thin coat on the surface(1st coat)
3. Lay a fiberglass cloth(8mm x 8mm) closely on the first coat(1st cloth)
4. Thin the paint with water by 10:7
5. 2nd coiat
6. Thin the paint with water by 10:1
7. 4th coat (Note: the qualified thickness is 2mm)
D. 48 hours after the waterproof layer is finished, apply a protective coat of 20 mm thick with cement and mortar slurry.
Places of application:
A. JS-I waterproof paint SWJ-3301 is particularly suitable for interior and exterior waterproofing work not always immersed in water.
B. JS-II waterproof paint SWJ-3311 is particularly suitable for interior and exterior waterproofing work always immersed in water.
C. JS waterproof paint SWF-3321 is particularly suitable for waterproofing work for interior and exterior wall, bathroom, toilet, pool, etc.
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Building CoatingNegotiableMOQ: 2700 Kilograms
-
Stainless Steel PVC Plastisol Mixer With Dual-Shaft Agitator & Temperature ControlNegotiableMOQ: 10 Sets
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
