4 Inch Iron Material With Adjustable T Bar and Used for Led Trim and Bulb Pot Light Etl Listed

Recessed ic airtight downlight housing with T bar 4 inch etl listed

Item No.: K4-IA

Description
• Designed for direct contact with insulation
• Can be installed in 1/2" to 1-3/8" thick ceilings
• Includes adjustable hanger bars with integral nail
• J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five
1/2" knockouts and four romex knockouts with strain clamps
• ETL listed for damp location W/Feed through

Housing

Die-formed aluminum for maximum heat dissipation and rust protection

Designed for New Construction installation and suitable for using in insulation covered ceilings

Housing can be installed in 1/2" to 1-3/8" thick ceilings.

Hanger Bar

Allow housing to be positioned and locked at nay point within a 24" joist span.

Can be shortened for 12" joists.

Can be positioned on long or short axis of the housing.

Contain integral nail.

Hanger fit onto T-bar spline for quick alignment.

Junction Box

ETL listed for through branch wiring 2 in-2 out or 4 in-4 out J-box for your better choices.

Designed for straight through conduit runs 1/2" and 3/4" romex wiring knockouts.

Pre-wired junction box provided with removable access plate.

Knockouts equipped with pry out slots.

All leads are #18AWG wire, ground wire is connected to the bottom, quick connectors are supplied on all leads.

Our service

1.All of your questions and suggestions related to us or our products, we will reply you in details within 12 hours.

2.Well-trained and passional sales & after- sale services, we can do everything to meet your needs.

3.Shipping port: Guangzhou, China mainland.

4.EXAMPLES are prepared. Discouts are offered based on order quantities.

 Advantage:

1.Nice Price

2.High Quallity

3.Save energy