Konida Medical Laser Blue Film for x Ray Tube
Specifications
The film has good quality, clearly, good resolving power ultrasonic report photos , more exactly to know the patient condition.Medical Laser Blue Film(KND-K)has image layer and protect layer on different side of thinner blue polyester bases, and there are no sensitive silver halide in both layer. The film is fit for laser printer to print digital image which is processed and stored in the computer, to attain the enhanced x-ray image quality. Compared to traditional silver halide processing, the procedure is more convenient and the speed of processing is faster. Meanwhile, it reaches to the goal of environment protection because the whole procedure is free of the Chemicals.
The image published by this film is of low fog, high-sharpness, high max density, and bright tone, it can be used directly on KONIDA laser printers.
Features
Waterproof, wearable, easy to store
Scratch-resistant, can be stored for years with high quality
Signable, can be signed directly on the surface
The film base has excellent degradability.
Translucent coating,wathet blue and not easy to tear.
Processing
The product can be directly printed with Konida laser printers KND-DRYTEC-3000 or KND-DRYTEC-4000 to get ideal image.
Storage
The original packaging should be stored in dry, cool, clean rooms, and should prevent from direct sunlight, acid-base gas.
Specification requirements are below.
1. Temperature, humidity: Temperature 10-23 centigrade;
Relative humidity 30-65 percentages, store far away from heat source.
2. Gas: The storage room must not have hydrogen sulfide, ammonia, sulfur dioxide and formaldehyde such acid gases.
3. Pile, Please keep film upright to avoid the bad influence caused by pressure.
Period of validity
The period of validity is 30 months under above environment.
Conditions of usage
The best condition of usage as following
Temperature 18°C~24°C, humidity 50%~65%RH.T
Notes
1. Store the film under the conditions specified above.
2. Take the film out of the cool place and place the film with the package in the place where the film will be used for at least 4 hours, to avoid the steam concentrate on the film and damage the film.
3. It should be careful to handle the film, don’t crash, fold, distort and rub the film, don’t touch the film with wet hand.
4. Dealing with the waste film should obey the local law and regulations.
Package and Size
1.Konida Medical Laser blue film KND-K, Suitable for Konida laser printer KND-DRYTEC-3000,KND-DRYTEC-4000.
Name |
Model type |
Size |
Sheets/box |
Boxes/case |
|
Konida medical Laser blue film |
KND-K |
8in×10in |
20cm×25cm |
200 |
5 |
10in×12in |
25cm×30cm |
200 |
5 |
||
11in×14in |
28cm×35cm |
200 |
5 |
||
13in*17in |
32cm×43cm |
200 |
5 |
||
Reference
Printed medical laser blue film(KND-K)
Factory
Related devices
Attending exhibition
Package

Send Inquiry to This Supplier
You May Also Like
-
Medical Hospital Radiography Room Protection X-ray Lead Glass for SaleNegotiableMOQ: 1 Set
-
Digital ThermometerNegotiableMOQ: 5000 Pieces
-
Dengue IgG/IgM and NS1 Test CassetteNegotiableMOQ: 1
-
Hot Sale Cheap Cheap Portable Colorful Finger Pulse OximeterUS$ 1 - 35MOQ: 100 Pieces
-
Set of 80pcs pH Test Paper Strips Brand New and High QualityUS$ 1 - 100MOQ: 100 Pieces
-
729017 REFLEX HAMMER GIFTS SETNegotiableMOQ: 1000 Pieces
-
2017 Composition Analyze Equipment 9D NLS Sub-health Detector Best 9d Nls Diagnostic ScannerUS$ 480 - 700MOQ: 1 Set
-
Digital Thermometer Flexible TypeNegotiableMOQ: 5000 Boxes
-
Car Trunk Strip-for SealingUS$ 0.5 - 2.5MOQ: 1000 Meters
-
Temperature Indicator for Environmental Scan/5 Level/Irreversible/WaterproofUS$ 110 - 220MOQ: 40 Units



