Contact Platform Support
Help Center3/8"-16x7/16" Brad Hole Tee Nut
Related Products
-
Stainess Steel Brad Hole Tee Nut 1/4"-20x5/16"US$ 0.001 - 0.1MOQ: 10 Pieces -
Industrial Round Base T-nutsUS$ 0.001 - 0.1MOQ: 10000 Pieces
-
M8x1.25 Hex Flange Nut With Original Color (DIN6923)US$ 0.001 - 30MOQ: 10 Pieces
-
Din6923 Hex Nut m8 (DIN6923)US$ 0.001 - 30MOQ: 10 Pieces
-
M8 Serrated Hex Hex Flange Nut (DIN6923)US$ 0.001 - 30MOQ: 10 Pieces
Specifications
3/8"-16x7/16" brad hole tee nut1.material:steel,stainless steel ,etc
2.finish:zinc ,nickel,etc
3.various size is ok
3/8"-16x7/16" brad hole tee nut
- Used for wood applications while leaving a flush surface
- Nuts contain brad holes and must be attached using small brad nails
- Nut Diameter: 3/8-in
- Nut Height: 7/16-in
- Nut Thread Size: 16
- Nut Width: 1-in
- Thread Type: Coarse
- Type :SAE type
- Material:stainless steel
| size | 3/8" |
| height | 7/16" |
| hole | three hole |
| diameter | 3/8" |
| thread type | coarse |
| non standard | yes |
| packing | 15kg/carton,36cartons/pallets |
Round base t-nuts are nice because they are easier to install than 4 prong t-nuts.
They are used in most commercial climbing gyms because they are easy to install and stay secure.
Unlike 4 prong t-nuts you don't need two people to install them properly. You can insert them by hand into the pre-drilled holes in your climbing wall. There are 3 holes in each t-nut which allow you to fasten a couple screws into the wood from behind the wall. These screws will keep the t-nut from spinning and from popping out when you try to fasten a hold to the wall. 3 zinc plated screws are included with each t-nut ordered. If you are willing to spend the extra money you'll save a lot of time!
1.Material: Carbon steel, alloy steel. Stainless steel
2.Standard: DIN 557/DIN562/DIN798/JIS B1163
3.Grade: 4, 6, 8, 10 etc
4.Surface Finish: Zinc plated. Black, plain, hot dipped galvanized, etc
5.Size: From M6-M24
6.finish:black ,plain,zinc ,plain,etc
7.OEM accepted
petitive price and high quality
9.main market: Italy,England,Russia,Turkey,America,Canada,Brazil, Argentina,Peru,Ecuador,South Africa, Australia, New Zealand, Iran, etc
10. Application
Sometimes old T-Nuts become damaged with use or are lost when furniture is moved. Damaged or lost T-Nuts need to be replaced. T-Nuts provide the nut base into which the hanger bolt of a furniture leg may be screwed. The hanger bolt screws into the T-Nut and extends up into a cavity predrilled to sufficient width and depth to contain the screwed in hanger bolt.
11. Note about Size
The size of the hanger bolt determines what the size the T-Nut needs to be. These T-Nuts fit the Metric Size M8 Hanger Bolts. It is important to select the proper size T-Nuts for your hanger bolts.
12. Installing the T-Nut
Select the location for the T-Nut installation
If a cavity is already present for the screwed in hanger bolt, all that needs to be done is to tap the T-Nut into the proper location with the sleeve of the T-Nut extending into the already present cavity.
If no cavity is present for the sleeve of the T-Nut and the hanger bolt, a new cavity will need to be drilled at the proper location. After the cavity is drilled, then the T-Nut may be tapped into the installation site.
The furniture leg is then securely screwed into the T-Nut and the installation is complete
Photo:
How to install t nuts:
-Packing:
1.packing:small box /bulking packing/roll packing+carton+pallets
Usually,48cartons /pallets
-Shipping
1.by express: DHL,FEDEX,UPS,TNT,ARAMEX,etc
2.by sea
3.by air
1.sample :free sample is ok
2.make your logo label
3.packing as your requirements
4.OEM can be accepted
petitive price and high quality
1.Question: what's you material, OEM is ok ?
Answer:we have carbon steel and stainless steel material , any material can make as your requirements .
OEM is accepted .if large qty there is no need mould fee .
2.Question: free sample is ok ?
Answer:sample for standard is free. sample fee is need for non-standard . but freight you need to pay for it .
of course , you can save the sample fee and freight if you place the order . special sample will send you to test. then after confirmed large prouction will start.
3.Question:How is your packing ?
Answer:usually about inner packing we have bulking packing(polybag packing) ,roll packing ,small box packing ,then put into the carton , last packed into the pallets .
4.Question: How is your quality.
Answer: we can offer you the related material report or quality export as your requirement.
Sample can offer you to test. about the the quality we can promise you the quality after the goods selled six month . if some wrong happens cause the goods quality ,we will offer you the best solution.
Any questions please send us the email or call me . Thanks and have a nice day!
Send Inquiry to This Supplier
You May Also Like
-
High Strength Large Hexagon Nuts for Trucks DIN 934 DIN 6915 DIN 439 Zinc Plated NutUS$ 0.01 - 0.05MOQ: 1000 Pieces
-
Hexagonal Lock NutNegotiableMOQ: 2000 Pieces
-
M8 M12 M14 7/16 Plastic Hydraulic Hexagonal Dome Head Bolt Nut External Protection Bolt Cover CapNegotiableMOQ: 100 Pieces
-
Cheap DSG16 Screw Nut SupportUS$ 1.5 - 1.7MOQ: 1 Piece
-
A2-70 Stainless Steel Metal Lock Nut M20US$ 0.2 - 1MOQ: 1 Piece
-
Good Price DIN935 Stainless Steel Hex Slotted NutUS$ 0.1 - 1MOQ: 10000 Pieces
-
Stainless Steel M6 Butterfly NutNegotiableMOQ: 50 Pieces
-
Manufacture Stainless Steel Knurled Ring Nut With Low PriceUS$ 0.001 - 0.1MOQ: 50000 Pieces
-
HARDWARE NUTS/HARDWARE ACCESSORIESNegotiableMOQ: 10000 Pieces
-
Brass Insert Nut Custom Made for Pipe FittingsUS$ 0.25 - 0.65MOQ: 200 Pieces
