Contact Platform Support
Help CenterGlow In The Dark Tape Sticker Paper Luminous Adhesive Film
Related Products
-
Luminous Tape Glowing in the DarkUS$ 10 - 15MOQ: 200 Square Meters -
Self-adhesive PET Luminous Arrows SignsNegotiableMOQ: 200 Square Meters
-
Luminous SignsNegotiableMOQ: 200 Square Meters
-
Glowing Film in the NightNegotiableMOQ: 200 Square Meters
-
Luminous Adhesive FilmUS$ 10 - 15MOQ: 200 Square Meters
Glow In The Dark Tape Sticker Paper Luminous Adhesive Film
Description
- This item Luminous flm is a high performance photo luminescent film for safety and emergency exit signage.
- It has distinctive characteristics after it is exposed to light energy (sunlight, ultraviolet ray, fluorescent lamp and so on).
- It continues emitting visible light for many hours in the darkness without any excitation light sources.
Feature
Acrylic material.
Self-adhesive backing (PSA backing), superior PSA adhesion for easy installation.
Rechargeable “glow in the dark” signs and markings.
Expected performance life: Ten (10) years
Excellent chemical and stain resistance.
Dimensionally stable, durable, multilayer film.
No radioactive materials used in manufacture of this product.
May be safely disposed of in a sanitary landfill or by incineration.
- High conformability
- Wide usage of signs and markings
Meet and exceeds
- New York City Bldg. Code Ref. Std. RS 6-1 and RS 6-1A.
- ASTM E2072, IMOA.752, OAHA 1910, 2000 IBC, DIN-67510 Part 4.
Application and Uses
- Primarily intended for interior luminous signs and markings, including safety signage , code compliant building signage, marine, passenger rail and military in buildings.
- Can be applied easily to walls, ceilings, doors and railings.
- Adheres to a variety of substrates.
Limitations of End Uses
This tem Luminous Paper is not intended or warranted for the following:
- Application surfaces subjected to gasoline spills or vapors.
- Application to complex curved surfaces, corrugated surfaces or riveted surfaces.
- Outdoor applications.
Product Data
Physical Properties |
Property Description |
Visual Appearance |
Glossy appearance, light yellow green color |
Adhesive |
Permanent pressure sensitive |
Application Surface |
Flat, simple curves |
Application |
50°F to 100°F |
Temperature Range |
10°C to 38°C |
Technical Data (mcd/m2)
(excitation source is 1000 LX, test begin at saturating amount of excitation energy)
Emission peak |
5 seconds |
10 minutes |
60 minutes |
480 minutes |
600 minutes |
≥1000 |
≥1000 |
≥150 |
≥20 |
≥2.5 |
≥1.5 |
Typical Physical Properties
Property |
Values |
Thickness (film and adhesive) |
9-11 mils |
Service temperature range |
-30°F to 200°F -34°C to 90°C |
|
Application temperature range (air and substrate) |
50°F to 100°F 10°C to 38°C |
Applied shrinkage |
0.031 inch 0.8 mm |
Printing
Available for graphic printing and plotter cutting.
Chemical Characteristics
Resists mild acids, mild alkalis, and salt spray.
Performance Life
The performance life of Luminous Paper may vary depending on application techniques. Experience has shown that when properly applied, this material will remain highly effective for safety and emergency exit signage for up to 10years indoor but no warranty of durability is given for this material.
we also offer another types photo luminescent film for your selection, with glowing time for 5/12 hours respectively.
Send Inquiry to This Supplier
You May Also Like
-
LDPE Protective Film PE Protection FilmNegotiableMOQ: 1000 Kilograms
-
Hook and Loop Adhesive TapeNegotiableMOQ: 400 Rolls
-
Anti-Static PE Conductive Polyethylene Film for Aviation & Communication EquipmentNegotiableMOQ: 100 Kilograms
-
Packaging TapeNegotiableMOQ: 2500 Rolls
-
2016 NEW Product Diaper Use Adhesive Side TapeUS$ 0.5 - 1MOQ: 200000 Square Meters
-
Pressure Sensitive Foam Seal for BottleNegotiableMOQ: 1 Piece
-
Fire-proof no Moldy Fiberglass Joint Tissue TapeUS$ 0.08 - 0.18MOQ: 10000 Square Meters
-
Adhensive TapeUS$ 0.2 - 0.35MOQ: 2400 Sets
-
Crepe Paper TapeNegotiableMOQ: 100 Rolls
-
Nobby White Lace TapeNegotiableMOQ: 8000 Rolls
