Iphone USB Charger
Specifications
Iphone USB charger1:USB charge for Mobile,IPHONE,IPAD,MP3,MP4
2:5V 1000ma*2
3:GS,CE,BS approve
4:input:12V output:2000ma
Iphone USB charger
1:USB charge for Mobile,IPHONE,IPAD,MP3,MP4
2:5V 1000ma*2
3:GS,CE,BS approve
4:input:12V output:2000ma
5: Home car amphibious
5050
Product Specifications:
1:Input:Car charge:DC12V-24V
Travel charger:100V-240V~,50/60HZ
2:Output:1 USB DC 5V/1000mA
3:Ripple Boltage:<100mA
4:End chargeing current:100mA
5:Over-Current protection.
Must
- USB 2.0, A-type socket AC/DC charger for use in domestic and industrial environments.
- Should operate with a standard, 3-pin UK socket
- Comply with the following regulatory requirements
- Be fully tested, approved, certified and marked appropriately for CE marking.
- RoHS compliant and marked appropriately.
- Fulfil the requirements of Low Voltage Directives 2006/95 EG (EN 60950-1 11/2006)
- Fulfil the regulations of the EMC Directives 2004/108 EC (EN 55022 05/2008 & EN 55024 10/2003)
- Any other applicable regulatory standards.
- Be marked and suitable for WEEE regulatory requirements.
- All EMC and safety test reports to be supplied with samples.
- Pass independent laboratory test conducted by notified body.
- Meet the following electrical requirements
- Output voltage: 5.0V ±0.25V (at 250mA to 350mA max)
- Output current: 1000 mA
- Universal voltage inputs (90V – 250V)
- Input frequency: 47-63 Hz
- Faultlessly function within an ambient temperature range from -10°C to +55°C, between 5% to 95% non-condensing relative humidity.
- Be suitable for storage and transportation in conditions between –40°C to +75°C and 5% to 95% non-condensing relative humidity.
- Weigh no more than 80g
- The elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second.
- The power supply shall withstand a continuous output without damage.
- Be delivered with appropriate declaration/certificate of conformity.
- Be individually boxed
- Be deliverable through a standard UK letter plate and fit in packaging size L 160mm x H 34mm x D 45mm
Should
- Have instructions
- Not have a cable
Could
- Be multi country socket compatible
- Have an appropriate surface for branding in the future.
Won’t
- Have any branding
Output voltage: 5.0V ±0.25V (at 500 mA) - this may be cheaper and more common to find but will not power/charge our display.
Send Inquiry to This Supplier
You May Also Like
-
AC DC Power Adapter for Laboratory Equipment With EMI FilterNegotiableMOQ: 100 Pieces
-
AdapterNegotiableMOQ: 2300 Pieces
-
ALLINGE SDS591 USB Wireless WiFi Adapter Mini WiFi Dongle Receiver for PC/Laptop/DesktopNegotiableMOQ: 1
-
Used Accessory Scrap Recycle Untested Branded LaptopNegotiableMOQ: 10000 Pieces
-
the ADAPTOR for XBOX 360NegotiableMOQ: 10 Pieces
-
Hot Sale Powerful Universal Travel Multiple Plug Adapter for WorldwideUS$ 0.78 - 1.5MOQ: 1000 Poles
-
SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5 / 3.5 Inch Hard Drive 2015 New ArrivalUS$ 1 - 100MOQ: 100 Units
-
Mini Gender Changer VK2-0075US$ 0.1 - 0.99MOQ: 5000 Pieces
-
Universal Laptop Power Adapter Charger 95W With 9 TIPSNegotiableMOQ: 3000 Pieces
-
Transformer --HBW SeriesNegotiableMOQ: 1 Piece