SMD2835 2.6w 12v LED G4 recessed light wich CE RoHS

SMD2835 2.6w 12v LED G4 recessed light wich CE RoHS

LED round G4(Surface Mounted Diode) are designed with 18 SMDs extra bright SMD2835. Suitable to economically replace 30w Halogen lamps in most interior light fittings. These lamps are ideal for homes, offices, caravans, RVs, motorhomes, marine use and other vehicles

Specification:

Wattage:                          2.6 Watt                                    

Certification:                   CE and RoHs 

Equivalent to:                  30 Watts Halogen lamp             

UV or IR Radiation:        No

Dimmable:                      No (Non-Dimmable)  

Current:                           Constant               

Average Life:                 50,000 hours            

Lamp Base:                    G4 GY6.35 or T10                            

Color:                             Red, Green, Blue, all are available
Beam Angle:                   120 Degrees
Dimensions:                   39.5mm diameter x 9.2mm
 

Our LED G4 are available with 12V AC/DC running or 10-30V DC, The operation of the lights must happen on batteries or suitable LED transformers. Non-suitable transformers, like electronic transformers mostly applied in households for kitchen lights for instance, simply ruin the LEDs, and the lights melt. Our warranty specifically excludes damage to LED lamps due tounsuitable power supplies.

What is the defference between warm white and cool white? 

The LED G4 lights are available in bright (cold) white and warm white colours. The colour temperature is measured in Kelvin, and high Kelvin numbers (above 5000) are considered bright white, while lower numbers (around 3000) are warm white. Warm colours are yellowish, more resembling sunlight, these LED G4 lights emit a very similar light to halogens. Bright white colours are bluish rather, resembling moonlight. These lights are brighter in performance as well. These two colours create whole different atmosphere in the room.

How to replace G4 halogen lamp with G4 Led bulbs correctly?

Most G4 Led lamps or bulbs require a 12V DC input voltage, while, as aforementioned, typical G4 halogen lamps are driven with a 12V AC transformers. Driving a G4 led lamp/bulb with improper 12V AC transformer, may cause risks of failures, either G4 lamp not working, or G4 lamp flickering, or G4 led lamp going out shortly.

Nowadays some leading manufacturers, i.e. Philips, offer a 12V AC/DC G4 Led lamp/bulb, which has wide compatibility with existing 12V AC halogen transformers. Since there are too many kinds of halogen transformers from different manufacturers/brands, we suggest customers to buy a couple of samples to test the compatibility firstly before placing order, or change the 12V AC halogen transformer with a 12V DC LED power supply/transformer.

Tips to replace G4 halogen lamp with G4 Led lamps/bulbs?

Many users encountered problems during replacing G4 halogen lamps with G4 Led capsules/bulbs, either G4 lamp not working, or G4 lamp flickering, or lamp going out shortly.  Here below are some tips for people who desire to replace G4 halogen lights with G4 led bulbs/lamps.

1. Identify the power of in-use G4 halogen lamps on existing light fixture, and decide which power of led bulb to choose. Usually 10W G4 halogen needs a 1.5W~2W Led bulb to replace.
2. Measure the max. allowable size inside the light fixture. This is to avoid fitting issue between G4 led bulb and your light fixture.
3. Check whether your G4 halogen lamp is powered by an electromagnetic transformer, or an electronic transformer.  In past years electronic transformers are more frequently used in various fixtures because of its lower cost.

Tips about  transformer:

- If it’s an electromagnetic transformer, what you need do is just to select a 12V AC G4 Led bulb with proper power & size.

- If it’s an electronic transformer, things are more complicated, because currently Led lamp has a bad compatibility with electronic transformer, and nobody can offer an universal G4 Led bulb, which has full compatibility with all kinds of electronic transformer, even Philips, Osram.  Therefore, you’d better take a couple of samples to test before you replace all G4 halogen lamps. Or, you can choose a 12V DC G4 Led bulb, and 12V DC transformers, to replace both G4 halogen lamp and halogen transformer. For new installation, it’s highly suggested to choose 12V DC G4 Led bulb & 12V DC transformer because its reliability.

Certificates: 

led round G4 back pin 24V has CE RoHS certification. 

Trade Terms: 

1 Payment: Western Union or T/T are welcomed.

2 Production lead time for 100-30000pcs:7-15 days

3 Sample of led round G4 back pin 24V can be delivered in 3days

Our Services: 

01) Provide you professional led round G4 back pin 24V design

02) Warranty 2 years and maintenance free

03) All your inquiry will be reply in 24 hours in our working day

04) Well-trained and experienced staffs to answer all your enquiries in fluent English.

05) OEM&ODM, any your customized lightings we can help you to design and put into product.

06) Protection of your sales area, ideas of design and all your private information.