Natural Solid Kempas Wood Floor

Specifications

Kempas Solid Wood  Floor Specifications:

Edges and Side: 
Yorking Hardwood mill the solid kempas wood with four side Tongue & Groove Joint,board to board fit perfectly to each other,very easy to installation.Each board is with slightly 45°Micro-beveled Edge,which makes the flooring looks elegant.

Moisture Content:
Normally the kempas raw wood is properply dried under a MC of 12% in order to produce a qualfied timber floor.Our  factory present a report as a proof that each batch of our solid kempas timber floor keeps with moisture content in the range of 10%-12%.

Coating of Kempas flooring:
Solid kempas flooring from Yorking is sealed by primer UV finish on six sides on floor board , it enhances the dampness resistance to garantee the board stability after long time use. Solid kempas wood flooring surface coating is applied by 8 layers primer finish,4 layers top finish.The top finish we use germany treffert aluminium oxide UV coating which greatly enhanced the scratch resistance of the timber flooring.

Product Show

Remarks: 

1. Due to the camera settings,all products photos from Yorking Hardwood shall not be garanteed 100% same to our real wood floor.

2. Natural wood color variations shall not be considered as quality problem and a short piece of wood plank can never be a full representation of our wood flooring overviews.Samples are needed to make sure you are purchasing the wood flooring with correct color effect.

Factory Show: