Nylon Abrasive Filament Wire Cup Brush,cepillo Taza Latondo
Specifications
The flexible filaments bends at every angles.This provides in thorough and uniform brushing action on irregular surfacesProperties:
1.The flexible filaments bends at every angles.This provides in thorough and uniform brushing action on irregular surfaces,curved surfaces and all types of corners.
2.It has outstanding chemical resistance.Works well with acid,alkali and a wide range of solvents as well as chemical solutions.It has a low water absorption rate which makes it good for use in both dry and wet conditions.
3.It is aggressive,tough and long-lasting.
4.Unlike sanders which work only on flat surface,it can be used any where to help reduce wastage and keep the working environment clean.
5.Unlike metal wire brushes,its filament is not brittle or abrasive and it will not scrape working surfaces.
6Available in a variety of grits.
General safety instructions
We strongly recommend the wearing of safety clothing and protective goggles during brushing in order to exclude possible injuries through extraneous elements, dirt, rust, and burr residuals. No persons without protective clothing should stand in the direct vicinity of the work area of the brush. In the interest of your own safety and that of your co-workers, please observe all instructions regarding work safety, the recommended work- and safety r.p.m.s of products as well as the recommendations and operating instructions of the manufacturers of the driving device you use
Send Inquiry to This Supplier
You May Also Like
-
Grinding WheelNegotiableMOQ: 2300 Pieces
-
Fisherman Fishing Use Double Sides Multifunctional WhetstoneNegotiableMOQ: 1000 Pieces
-
Diamond Squaring WheelUS$ 30 - 60MOQ: 24 Pieces
-
HIGH QUALITY 8 PIECE DIFFERENT SHAPES DIAMOND ABRASIVE GRINDING MOUNTED POINT SET WITH 2.35mm SHANKNegotiableMOQ: 600 Sets
-
Fiberglass Reinforced Mesh Discs for Grinding WheelNegotiableMOQ: 1
-
Diamond Grinding Wheel for Cutting Various MaterialNegotiableMOQ: 100 Pieces
-
Disc Cutting Abrasive Grinding Wheel For CarbideUS$ 2 - 8MOQ: 10 Pieces
-
Felt Wheel/wool Felt WheelsNegotiableMOQ: 1 Piece
-
Sanding SleevesUS$ 0.5 - 1.5MOQ: 2000 Pieces
-
SJ-1313 Thermostatic Wax Carving ToolUS$ 4.2 - 5.3MOQ: 5 Pieces

