3 in 1 Lathe, Drilling and Milling Machine

Specifications

3 in 1 lathe, drilling and milling machine,Compact, versatile combination machine,

3 in 1 lathe, drilling and milling machine

 

 

Features
* Compact,versatile combination machine.
* Adjustable height drill/mill head increases capacity.
* Large MT5 spindle bore.
* Large distance between center on longitudinal.
* Fine feed handle and clutch for precision milling.
* Headstock provides two step of feeds.
* Spindle is supported by high precision bearing.
* Headstock is constantly oiled during operation.
* T-slot cross slide.
* Adjustable gibs for the slideway.
* Power longitudinal & cross feed.
* Gearbox gets left and right hand threads to cut.
* High precision chuck.
* Equipped with emergency stop button.
* A reversion switch is included for added versatility.
* Tailstock may be offset for turning taper.

Specifications

Length	1650	65"
Width	700	27-3/5"
Height	900	35-2/5"
Shipping Weight	560kg	1236lb
Machine Weight	400kg	882lb
Crate Size	1900×850×1120	75×33-1/2×44"
Powerfeed (Z-Axis)	Yes
Powerfeed (X-Axis)	Yes
Table Size	7-7/8×16-3/4"
Threading Dial	Yes

 

Lathe Specifications

Distance between centers	915	36"
Dial Calibration on Crossfeed	0.05	0.002"
Dial Calibration on Leadscrew	0.05	0.002"
Headstock Taper	MT5#
Lathe Chuck Mount	Bolt-On
Spindle Bore	38	1-1/2"
Spindle Speeds	9(250-1600 RPM)
Swing over bed	300	12"
Swing over work table	140	5-1/2"
Thread pitch on processing	0.5-3	11-40 1/n"
Thread kinds on processing	12	20
Tailstock Taper	MT3#
Z-Axis Working Travel	700	27-3/5"
X-Axis Working Travel	160	6-1/3"

 

Mill/Drill Specifications

Head Rotation	360 degree
Head Travel	130	5"
Spindle Center to Support Column	400	15-3/4"
Spindle to Table Distance(Min-Max)	250-380	10-15"
Spindle Speeds	9(315-2000RPM)
Spindle Taper	MT3#
Tool Size Limits	25	1"
Z-Axis Working Travel	400	12-1/16"
X-Aixs Working Travel	160	6-3/10"

 

Electrical Specifications

 

Horsepower	1100w(Lathe)&550w(Mill)	1-1/2&3/4hp
Motor Type	A/C
Phase	Single or 3-phase
Voltage	110 or 220 Volts

 

Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right-and left-hand threads in metric and inch.

Bi-directional power-feed
No stop to realized the functions of revolution and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finish of highest quality work

Two separate motors
This machine is multi-purpose machine tool of bench type, it is mainly used to lathe, drill and mill. which controlled by two motor.

Quick Changeover
12" mill clearance allows room for both lathe and mill setups without removing the lathe chuck.

 

STANDARD ACCESSORIES
1. Dead center
2. Allen wrench
3. Single open end wrench
4. Change gear
5. Drill chuck
6. Rocke
7. Tapered drift
8. machine base
9. Drill chuck arbor

SPECIAL ACCESSORIES
1. Turning tool set
2. Machine vice
3. Steady rest
4. Follow rest
5. Face mill cutter
6. Face plate
7. Back plate(φ160/φ200)
8. Four-jaw chuck(φ160/φ200)
9. Step block
10. Rolling center