TM copper electric kettle heating tube

Technical Parameter

Electric Kettle Heating Tube

Body Material

   T2 red copper

Pipe Size

   Φ8.0

Tube wall thickness

0.4~0.5mm

Thermostat System

STRIX control,satisfying the various demand of compatibility testing

Terminal Connection

squeeze riveted to withstand tension of 5 kg

Temperature Control

3.6±0.4;13.1±0.25;14.1±0.2

Watt

  customized

Voltage

  Customized

Overall Dimensions

 multi-circle, OEM, customized in drawing or samples.

Electrical Performance

AC1500V/0.5mA.3S;DC500V 100MΩ;Leakage current<0.5mA

Life Time

Power on 0.5 time voltage boil dry until trip,then water cooling within 5 seconds,non-yellowing on tube surface.Coating without upwarping and sparkling.
Instal the heating tube and thermostat inside of kettle,inject 1L cold water,boil water until boiling by rated voltage,boiling 5 seconds later power off,then drain and cooling,inject 1L cold water again boil until boiling.So after 10000 cycles,heating tube can be still work normally.

Warranty

  TWO year

High- pot test

  1500V/2mA/1S  

Resistance insulation

  100MΩ MIN

Leakage current

  0.5mA MAX

Surface Treatment

  electronickelling

Hydraulic testing

  withstand 0.4MPa pressure test no leakage

flange material

  SUS304 or SUS430

welding of flange technique

 Flange and pipe joint with brazing

A:Our factory is located in Changshu of Suzhou city, Jiangsu province, China. 

It takes about 2 hours from Shanghai to our factory by car. All the client, from 

home or abroad, are warmly welcome to visit us.

A:Yes, the products in the website are only common type or the customized types 

ordered by our customers, we can supply products according to your samples and 

drawings.

A:Quality is priority, our QC always keep step to quality control during production 

process,all of the orders will be deliveried after QC passed.