Home > Products > 5 gallon bottle cap(one piece) > 5 gallon water bottle cap
5 gallon water bottle cap
- 15000000 Piece / Pieces per Month
- Zhuhai Port
- T/T
You May Like
Product Details
Material | Plastic | Plastic Type | PE | |
Type | Smart Lids | Usage | Bottles | |
Feature | Non Spill | Custom Order | Accept | |
Place of Origin | Guangdong, China | Brand Name | Jia Lin | |
Model Number | YL-010 |
Product Description
· New food-rate plastic material.
· Dustproof, Non-spill and Security.
· One-stick label,available with or without foam liner
· Easy to tear on the bottle.
· The inner bottle cap opens smoothly and securely when the bottle removed from the cooler, which particles from entering bottle.
· Pass the FDA.
· Embossing & printing custom logo based on volume.
· 192,000pcs/1x20'container,460,000pcs/ 1x40'High cube container.
The degree of tightness between 5 Gallon cap and inner cap is coordinate mooderately,when normal using,the inner cap can easily push out and the cap can easily unrip by hand after used.
Appearance conforms with these requirments:
item | standard |
product surface | product should be full,competely structure, surface and inside is smooth, without apparent shrinkage, bubble, flash and defect |
color | color equably |
pollution | no dust, no plastic scrap or other impurities, no obvious odor |
trademark | logo mode& number are full, legible |
Singel stick labels quality subjects to the follwing requirements:
item | reqirement |
printing | single stick label should have right pattern,colors and fonts, good printing quality no obvious show besmirch,no noise and no defects. |
Seal cutting | After cutting ,the single stick labels edge is smooth, no flash and silk glue. After cutting, geometry center is on the center and the deviation error less than 2mm.The label on the center of 5 Gallon caps. The deviation between label and caps center diameter error is not more than 2mm |
Heat sealing | heat sealing evenly, level off, without apparent ruffle, become warped edge, Stick label and 5 Gallon caps heat sealing are strength.when taking off label,the label area remains on the cap no more than 50mm2 and not more than three areas, the largest area does not exceed 300mm2. |
Thermal stability | A, resistance to low temperature,the label not appear warped edge,roll edge and loose. B. resistance to high-temperature,the label not appear warped edge,roll edge and loose. |
Contact Us
- Zhuhai Yonglong Jialin Watercooler Co., Ltd.
- Contact nameZhuoyuan Liang Chat Now
- Phone86-756-8821146,8824612,8822608
- Address1/F, No 13 Pingdong 4th Rd., Nanping Science and Technology Industry Garden, Zhuhai, Guangdong, China , Zhuhai, Guangdong
Product Categories
New Products
-
5gallon water bottle caps
-
New PE 5 gallon bottle cap
-
water bottle caps
-
5 gallon red color caps
-
(18.9L) 5 gallon plastic bottle cap for 5 gallon bottle
-
5&five gallon blue plastic bottle cap
-
New PE 5 gallon bottle red cap
-
18.9 Litre plastic bottle green cap
-
sealed mineral water bottle green caps
-
18.9 litrea red color cooler caps
-
short pop PE 5 gallon bottle cap for plastic mineral bottle
-
5 gallon disc top bottle caps for mineral water
Popular Searches
- trigger sprayer
- lotion pump
- mist sprayer
- cream pump
- soap pump
- perfume spray
- nano mist sprayer
- Dispenser Lotion Pump
- Plastic Trigger Sprayer
- mascara bottle
- Hair Styling Foam
- Wash Foam
- Nail Polish Remover Pump
- Dispenser Pump
- Bottle Pump
- Nail Polish Remover Dispenser
- perfume sprayer
- plastic sprayer
- plastic pump
- shampoo pump
- Fine Mist Sprayer
- sprayer pump
- lotion sprayer
- spray pump
- Mist Spray
- bottle sprayer
- plastic lid
- foam pump
- moisturizing sprayer
- micro mist sprayer
Recommended Products
- Wholesale 18mm, 24mm, 28mm, 38mm Aluminum ROPP Caps with PE Liners for Wine, Beverage, and Spirit Packaging
- 120x80mm 32x32mm 45x45mm Round square Rectangular Pipe and Aluminum Structural Profile Plastic Plug Lid
- Construction Building Steel bar protection Plastic Cap Plastic Tubes Caps
- 30*44mm Metal Pilfer Proof Lid Wine Bottle Aluminum Ropp Caps
- 30*60mm wine cap metal ropp lid aluminium wine screw cap
- High quality 28mm pilfer proof aluminium spirit juice bottle screw cap
- 28mm 18mm Aluminum Screw Sparkling Water Sodas Carbonated Drinks Bottle Caps
- 28mm Aluminum Tamper Evident Screw Cap Screw Thread Aluminum Pilfer Proof Cap
- 28mm Aluminum Screw Caps with Thread and PE Liner Seal for Glass Bottles
- 26mm 27mm 28mm Aluminum Cap With Pastic Handle Ring Pull Bottle Caps
- 26mm 27mm 28mm aluminum pull ring bottle caps easy open closures
- 26mm 27mm 28mm aluminum pull tab cap with colorful plastic handle
Find Similar Products By Category
- Packaging & Printing > Lids, Bottle Caps, Closures
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Zhuoyuan Liang
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile