Lights and Lighting 500watt Led High Bay Flood Lamp

1. Technical Parameters of   lights and lighting 500watt led high bay flood  lamp

2. Advantages of  our  lights and lighting 500watt led high bay flood  lamp

(1) High power energy saving led flood light led outdoor flood light's radiator solve cooling problem perfectly,
replace traditional 600 w to 1000 w high power sodium lamp, energy saving extraordinarily.

(2) HDT buckle FIN, gear shaper, pressure pipe four innovative patent production technology, make high
power LED radiator lighter weight, easier assembly, structure, better heat dissipation performance.

(3) Module type assembly design, the support power diversity, rich product variety.

(4) Adopted pure copper tube riveted fins cooling technology, with excellent thermal conductivity to
conductionheat to the fins, achieve rapid decrease the temperature of light source, prolonging the life of the light source

(5) 13 bracket adjust point, 216 ° Angle adjustable, finished product lamp irradiation Angle change at will

(6) Breathing apparatus design of waterproof lampshade clear mist again at the same time, avoid condensation,  improve product quality, prolong service life

(7) Reflectors reflective rate 92%, reflective Angle 60°45°100°90°25°

3. Feature of  our  lights and lighting 500watt led high bay flood  lamp   

                                  The freedom to choose professional light distribution

Flake type high purity aluminum reflectors through anodic oxidation and polishing processing, the optimization

of lighting at the same time, the performance of the flare to reduce to a minimum, 25 ° and 45 ° to 60 °, 90 ° 100 ° angles such as choice, satisfy the professional light distribution, adapted to different occasions.

                                              Unparalleled heat engine

• HTD patented technology

Heat pipe and heat source is zero distance joint directly, the performance of the heat pipe play incisively and 
vividly, greatly improve the effect of heat conduction

• .Pure copper tuber

Heat pipe by using the theory of heat conduction and rapid heat transfer properties of cooling medium, transfer 
heat quickly to the heat source, thermal capacity than any known metal

• 3D heat dissipation

Each fins are distributed parallel relative to hollow out holes, or so appear a convection of air duct, and fins 
clearance form three-dimensional heat dissipation, send out quantity of heat to the greatest extent

• .Gear shaping patented technology

Fins and heat conducting plate directly closely together, minimize thermal resistance, without plating, beautiful environment

• .FIN patent technology

Each fins to maintain equal spacing and tight fit, form a whole, effectively enhance the fins fastness, with the minimum weight to achieve maximum cooling area

• Respirator design 

Balance inside and outside differential pressure, lamps and lanterns of waterproof clear mist again at the same time, avoid condensation, greatly reduce the salt product failure caused by corrosion, extend the service life, improve the quality of products.

•  IP65 waterproof 

 Balance inside and outside differential pressure, lamps and lanterns of waterproof clear mist again at the 

same time, avoid condensation, greatly reduce the salt product failure caused by corrosion, extend the service life, improve the quality of products.

•  Large Angle adjustment

 Screw lock attached type installation, multiple stents to adjust, the adjustable

 Angle of 240 °, light Angle can be adjust at will

•  The whole electrophoresis processing

Overall by the electrophoresis process, after 200 hours salt spray test, have excellent 

anti-corrosion and rust-proof function, suitable for harsh outdoor environment.

•   High die casting aluminum shell

High die casting aluminum unibody enclosure, beautiful and easy, solid and durable resistance.

Cooling fins and shell be in harmony are an organic whole, the overall efficient heat dissipation.

•  Toughened glass panels

4 mm tempered glass panel, high strength to protect the light source, and the light transmittance of 93%

 Acecore Optoelectronics Technology Co., Ltd. (Zhongshan) was founded in 2006, dedicated to the production and sales of high quality LED outdoor light and indoor lights,  electronic energy-saving lamps, T4 / T5 tube light indoor lamps and lanterns, total product more than hundred varieties.Company has engineers, senior technicians, and many other professional technology research and development staff and first-class production and testing equipment, guarantee the production of high quality.Strong technical force, complete production testing equipment and strict quality control process to ensure theproduct quality, won the trust of many

 1.Fast and High Qualtiy Service.