Quick link Wire Connector

 Quick link Wire Connector     QuickVise series products are widely used in agriculture and telecommunication industry. To use these products just simply insert the wire into the hole of QuickVise, the wire is gripped by spring-loaded clamps in the QuickVise which tighten more securely as the wires are pulled harder.

       While using QuickVise , a 3/8 inch hole should be drilled in the end of the end post for the wire, the wire is then inserted through the QuickVise which automatically holds the wire by its unique patented jaw system.

Catalog Number                               Strand Range(mm)                           Maximum Holding Strength(LBS/KG)

QuickVise -6056                                  2.0-2.5                                                1148LBS/520KG

QuickVise -6058                                  2.6-2.9                                                1545LBS/700KG

QuickVise -6062                                  3.0-3.5                                                2250LBS/1020KG

QuickVise -6064                                  3.6-4.0                                                3240LBS/1470KG

This quick link is produced by Guangzhou Hotlink Hardware Co., Ltd, a subsidiary of Guangzhou Horizon Printing.

About Guangzhou Hotlink Hardware
Guangzhou Hotlink Hardware focuses on cable connectors. The current products line cover Wire vise, QuickVise, QuickLink, QuickVise, FastLink series of all

speicifications, with quickly upgoing market in North America, South America, Europe and Australia.

Looking for a professional manufacturer of wire connectors? For more detail and similar products, Contact now and you'll be answered in 24 hours.