CE Medical Oxygen Regulator(DY-C3)A

Specifications

Medical oxygen Regulator

Input Pressure:15mpa

Output Pressure:0.2mpa-0.3mpa

Control Pressure of Safety Valve:0.35±0.05mpa

Details Description of Medical Regulator

Gas Type:oxygen

Input Pressure:15mpa

Outout Pressure: 0.2mpa-0.3mpa

Fowmete Control Range :1L/min-10L/15L/min

Material:breass

Connecting therad:Female G:5/8

Mainbody:Copper

Structure:piston type

Packing:10PCS/CTN(Color box)

GW/NW:19.2kg/18.2kg

Dimension:56*41*17.5cm

Main Feature

1.The product has artistic outlook,and flow control comfortable and stable .

2.The intemational standard connect way,is suitable for all kinds of gas bottle installation

Range of application

Give oxygen for first-aid or oxygen uptake for the penpie who are lack of oxygen 

How to use 

1.Open the valve of oxygen cylinder after connect the screw screw nut of air intake closely

2.Connect the oxygen pipe to the oxygen outlet firmly 

3.Demount the humidifying cup (anti clock wise rotation)put some distilled water in (puried water or plain boiled water can also take place),the wate aqahtity should be bottom and top tick mark,then tighte up the bottle cap to the humidifying cup (clokwise rotation).

Applications

Medical Regulator wide range of therapeutic use in hospital clinics,home care emergency units and so on.

How to use

 1. Open the valve of oxygen cylinder after connect the screw nut of air intake closely.

2. Connect the oxygen pipe to the oxygen outlet firmly.

3. Demount the humidifying cup(anti clock wise rotation), put some distilled water in (purified water or plain boiled water can also take place), the water quantity should be between the bottom and top tick mark, then tighten up the bottle cap to the humidifying cup(clockwise rotation).

 4. Rotate the flow regulating valve to the rate you need (anti clockwise to up, clockwise to down, till to close), then put it to nose to use.

 5. Close the valve of oxygen cylinder firstly while not using, then close the flow regulating valve until the pointer of oxygen manometer return to zero.

Attention

1. Make sure there is no ash on the connector and check the screw thread, then install the inhalator.

2. Make sure the flow meter is vertical to the floor and flow regulating valve is closed, then open the valve of oxygen cylinder slowly, regulate the flow after the high pressure gauge shows the pressure of the oxygen cylinder.

3. No drastic shock, far away with the corrosive substance, and no oil stain.

4. The set screw of the safety valve can't be rotated at random, non-professional people are forbidden to dismount.

Condition for storage

Should be kept in the environment whose humidity is less than 90%, no corrosive gas and drafty.

Quality guarantee period

We will fix or change the oxygen inhalator within a half and a year after the day of living the company when it can't proper functioning, it should be under the condition of obeying the rule of storage and using.