2013 New high-performance PIR infrared motion detector

Specifications

2013 PIR infrared motion detector
1.for all our GSM Burglar Alarm System
2,house use
3,elegant design
4,OEM ODM

New security high-performance PIR infrared motion detector

Model: HW-03D
Technical Parameters
Sensor: Passive IR sensor with low noise
Working voltage: DC6V, (4pcs AAA 1.5V dry batteries)
Static current: <60uA
Alarm current: <20mA
Working Temperature: +5~+45°C
Humidity: ≤95% (no fog)
Transmitting frequency: 315/433+0.5MHZ
Transmitting distance: no obstacle 80M
Detecting distance: 12M max
Detecting angle: Horizontal 110°, Vertical 60°
Coding method: PT2262 or EV1527 optional
Dimension: 112*60*38mm

 

 

 

 

 

Installation
  Detectors should be installed on the wall 1.8-2.5m above the ground (please refer to picture 4).
  Adjust detecting angle, try to make it face window and keep it vertical with walking direction (please refer to picture 5).
  Keep it away from heat, air conditioners and air convection areas (or close the door/window when arming).
  No obstacle or floating object is allowed (such as flower, grass, clothes and curtain that will be easily be waft by wind) in the detecting area.
  Detectors should be installed firmly without any waving and shaking.
  Don’t install it exposed to direct sunlight.
The above requirements are primary to avoid false alarm and alarm failure, please pay attention when installing.