Contact Platform Support
Help CenterWet Air Sander - RZ5500AR
Related Products
Concrete Rear-exhausi Air Wet Polisher
General Description: The Pneumatic Water Sander is a versatile sander, which can be used for any hard material and any profile to sand the uneven surface, especially, ideal to sand the marble, stone etc., construction material
Remarks:
1.The R.F.L. unit must inatalled between the air compressor & sander.
2. Due to assure the servicing life & operating smooth which must lubricated on the air inlet hole with #10 lubricating oil litter about 4 hours each.
3. The sanding pad must assured lock on the sanders.
4. In order to develop the high rate efficiency which employed at over heavy pressure is prohibited.
5. After sanding processing is over, which must lubricated on th air inlet hole with #10 lubricating oil and rotated idly about
10 sec. Esprcially to clean the dirty in the sanders.
Item No. |
RZ5500AR |
| Air Consumption | 16cfm(0.45m3 /min |
| Air Pressure | 90Psi |
| Shaft Thread | 5/8" -11;M14;M16 |
| Air Inlet | 1/4"Npt |
| Max Pad Diameter | 5" |
| No load Rev Speed | 0-5500RPM |
| N.W | 1.29KG |
Best wet polishing pad
Standard wet polishing pad (SWPP 3"4"5“6”)
http://www.china.cn/product-gs/812619071/Wet_Polishing_Pad.html
More information, please check out website http://kakatire.en.china.cn/
Send Inquiry to This Supplier
You May Also Like
-
Vandal-proof Standalone Interactive Information Kiosk With Curved DesignNegotiableMOQ: 1
-
Water Heating Mold Circuit Temperature Controller Units for Bottle Blowing MachineNegotiableMOQ: 1
-
Flash Gold Plating , FR-4, Mylar and Polyimide 1 -4 Layers Flexible Printed Circuit BoardNegotiableMOQ: 1
-
HT20 Oil-filled Diffused Silicon Pressure Sensor for Gauge/Absolute/Differential PressureNegotiableMOQ: 1
-
BMW Key ProgrammerNegotiableMOQ: 1
-
KMJ-6110 1150w and 350r/min Sander Belt Grinder ,power ToolsNegotiableMOQ: 100 Pieces
-
Double Head Disc Sander For SaleUS$ 899 - 6,999MOQ: 1 Set
-
Veneer Side SanderNegotiableMOQ: 1 Set
-
Polishing and Dust Removal Machine in OneUS$ 200 - 1100MOQ: 1 Square Meter
-
Premium PZ533 Zirconium Corundum Sanding Belts,915x50mm Abrasive Belt,for Knife Sharpen Rust Remove Polishing Knife Edge (40-120 Grit ）NegotiableMOQ: 9999999 Pieces
