Welt 2.3MM EL Wire

in carton

'Welt' 2.3mm EL Wire

This listing is for 2.3mm el wire with sewable tag running along it(EL Product needs a driver(inverter) to make it glow).The sewable tag is part of the colored sleeve that surrounds and protects the el wire.

The Sewable tag makes it very easy to sew the EL Wire into the seam of a garment or if you are modifying a car then it can be sewn into the panel seams. It is also easy to just stitch the tag straight onto a surface.

The wire is available in any of these colors:

Blue, Lime Green, Green, Turquoise-Green, Aqua (Tron Blue), Orange, White, Purple, Yellow, Red and Pink.

Because the EL naturally glows blue/green the brightest color of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colors right.

The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPERATELY.

This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between colored wire on one driver by using splitters you can also connect different strands to the same driver.

EL wire has loads of uses.

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.

This wire can be cut into smaller lengths and attached to another driver.

Our drivers can run many different strips of wire as long as the total length of the wire is under the driver's maximum capacity.

It is easier to buy it from us with the connectors attached but if you need to, then with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it is not needed.

Joining tape and tubing for attaching EL Wire is available from us this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

you will also definitely need some wire strippers

It is also recommended to place this joint away from where is likely to encounter stress (eg if it is threaded into clothes that will then be bent and jostled - try to keep this joint out for harms way - eg avoid putting it at the elbows)

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 3,000 hours.

Power Supply of EL(EL Inverter) 

We're sure you will be amazed - feel free to message me with any questions.