Contact Platform Support
Help CenterSmart Hotel Light Switch Hotel Touch Screen Wall Switch Room Status Switch 4 Gang
Related Products
-
Smart Hotel Light Switch Touch Switch Crystal Glass Panel 4 GangUS$ 330 - 550MOQ: 1 Set -
Hot Sale Smart Home Intelligent 4 Gang Touch Screen Wall Electrical Control Network SwitchUS$ 330 - 550MOQ: 1 Set
-
Hot Sale Smart Home Intelligent 4 Gang Soft Touch Light Switch Electrical Control Network Leather SwitchUS$ 330 - 550MOQ: 1 Set
-
2015 NEW Touch Panel Switch Smart Home Switch Smart Touch SwitchUS$ 160 - 250MOQ: 1 Set
-
2015 NEW Capacitive Touch Switch Smart Home SwitchUS$ 160 - 250MOQ: 1 Set
Smart hotel light switch Hotel touch screen wall switch room status switch 4 gang
This manual provides you the detailed technical information about the Switch Actuators, not only the installation and programming details, but also the usage explanation in actual application. They can be installed in the distribution boards on 35mm mounting rails according to EN60715.
These switch actuators can be used to control the switch loads, such as:
- intelligent switch
- Lighting
- Heating control
- Signal devices
The working current: Max 12 ma
Power consumption: Max250mA
Output: 4
Rated current, ac 250 vac Hz16A (50 ~ 60)
Temperature range: - 5 ℃ ~ 55 ℃
Installation method: standard 35 mmdin guide installation
The switch actuators are the modular installation devices, with 8 and 12 outputs for selection, using KNX connection terminals to connect to the system. The switch actuators need to connect an extra 230V AC power supply and provide to 4 outputs. It is able to use the Engineering Tool Software ETS (ETS2 v1.3 or later) with a VD2/VD3 file to allocate the physical address and set the parameters.
If the 230V AC power supply is not connected, all LEDs are flashing for indicating output state on the device.
It is able to switch from 4 to 8 independent electrical AC loads or three-phase loads and 4 electrical AC loads with the same phase of the 230V AC power supply by the switch actuators with maximum output of 6A per output and manual switch, as well as visible switching status via LED indication.
There are same following programming functions for each output:
w time function: on/off delay
w staircase function with the warning and adjustable staircase lighting time
w scene, preset control: 8bit/1bit
w logic operation: AND, OR, XOR, gate function
w status response
w forced operation and safe function
w threshold function setup
w control of electro thermal valve function
w manual operation switch
w indication of switch status (contact position)
Shipping way:
Send Inquiry to This Supplier
You May Also Like
-
High Quality Plastic Box Assembly GEC026US$ 0.8 - 1MOQ: 1000 Pieces
-
Replacement Chassis For IphoneNegotiableMOQ: 1 Piece
-
Original Galaxy S II I9100 LCD+Touch Screen for Samsung (Black/White)NegotiableMOQ: 5 Pieces
-
1.77'' Small Size Tft Lcd Screen for Consumer Electronics Quality Choice Most PopularUS$ 0.10 - 0.50MOQ: 1 Piece
-
4.7" Lcd Touch Screen Panel for Mobile PhoneUS$ 0.1 - 10MOQ: 3000 Pieces
-
Arduino LCD 2.8 Inch TFT With Touch With SD UNO Card R3US$ 1 - 100MOQ: 1 Piece
-
Touch Siemens for TP270-10US$ 15 - 23MOQ: 1 Piece
-
Various Kinds of Spare PartsUS$ 0.25 - 0.65MOQ: 200 Pieces
-
Best Quality Metal Cell Phone PartsUS$ 0.15 - 10MOQ: 100 Pieces
-
Phone Accessory Lcd DisplayerNegotiableMOQ: 500 Pieces
