Type of Roofing Sheets Galvanized Steel Sheet 0.13-0.5mm / Heat Resistant Roofing Sheets

 -Galvalume Sheet (aluzinc/zinc aluminum roofing sheets) / Roofing Sheet

1) Introduction of corrugated sheet's base sheet: hot dip galvanization steel roofing sheet

Hot-dip galvanization is a form of galvanization.

It is the process of coating iron, steel or aluminium with a layer ofzinc by immersing the metal in a bath of molten zinc at a temperature of around 840 °F (449 °C).

When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O₂) to form zinc oxide (ZnO), which further reacts with carbon dioxide (CO₂) to form zinc carbonate (ZnCO₃), a usually dull grey, fairly strong material that stops further corrosion in many circumstances, protecting the steel below from the elements. 

Galvanized steel is widely used in applications wherecorrosion resistance is needed without the cost of stainless steel, and can be identified by the crystallization patterning on the surface (often called a "spangle").^[1]

Galvanized steel can be welded; however, one must exercise caution around the resulting toxic zinc fumes.

Galvanized steel is suitable for high-temperature applications of up to 392 °F (200 °C). The use of galvanized steel at temperatures above this will result in peeling of the zinc at the inter

metallic layer. 

Electrogalvanized sheet steel is often used in automotive manufacturing to enhance the corrosion performance of exterior body panels; this is, however, a completely different process which tends to achieve lower coating thicknesses of zinc.

Like all other corrosion protection systems, galvanizing protects steel by acting as a barrier between steel and the atmosphere. However zinc is a more electronegative metal in comparison to steel, this is a unique characteristic for galvanizing which means that when a galvanized coating is damaged and steel is exposed to the atmosphere, zinc can continue to protect steel through galvanic corrosion(often within an annulus of 5 mm above which electron transfer rate decreases).

2) Corrugated GI Sheet / Galvanized Steel Sheet Specifications

Base Sheet: Galvanized Steel Sheet/ GI sheet China Supplier hot dipped zinc roof / aluzinc roof corrugated roof sheet

Corrugated sheets are made from Galvanized steel coils, Galvalume Steel coils, Galvalume Pre-painted sheet and aluminum sheet, pre painted hot dip galvanized steel coils. 

Corrugated steel roofing sheets are featured with easy installation, high strength and low in lost. They are widely use as the wall or roof ofprefab house, factory, warehouse, garage, exhibition center, cinema etc.

3) Base Sheet / Galvanized Steel Coil/Sheet Technical Data

GI Coil/Sheet, Hot Dipped Galvanized Steel Coil/sheet, zinc corrugated roofing sheet / Roofing Sheet price