(capacitor ) RSC2R7407SR

Specifications

Detailed Product Description

AC Motor Capacitor with Protected 10,000 AFC and 1.0 to 120.0uF Capacitance Range

• AC motor capacitor
• Pass large current power striding connect
• Series filter capacitors, vibrating capacitors, AC running motor capacitors, HID capacitors, fluorescent capacitors
• Operating temperature: -25 to +85^oC
• Capacitance range: 1.0 to 120.0μF
• Capacitance tolerance: J = ±5%, U = + 10 to -5%, K = ±10%
• Rated working voltage range: 250 to 500V AC, 50/60Hz
• Withstand voltage test:Dissipation factor (DF): 0.5% maximum when measured at 1kHz, 25^oC
  • Dielectric strength test (TV): rated voltage x 175% for 1-5sec
  • Between terminals and case (TC): rated voltage x 2 + 1,000V for one minute, at 25^oC
• Insulation resistance (IR):Pull test: will sustain 2 kg steady pull in the direction of lead egress and 1kg steady pull at any 90 degree angle for 60 seconds
  • Between terminals: above 1,000Ω, at in 100V DC at 25^oC
  • Between terminals and case: above 10,000mΩ, at 500V DC at 25^oC
• After test, capacitor shall show no evidence of damage and pass all electrical requirements
• Damp heat test: capacitor are subjected to an environmental test chamber at 90 to 95% RH, operating temperatures for 240 hours, after the test, capacitor shall be conditioned at room temperature for 2 hours and meet the following criteriaLife test: (on-off) 100,000 cycle, ±5,000 times on 2 seconds off 2 seconds at operating temperatures with rated voltage, after the test, the capacitance drift 5%, dissipation factor 0.5%, insulation resistance 50%
  • Capacitance change shall be less than 3%
  • Dissipation factor shall be less than 0.2%
  • Insulation resistance shall be over 50% of the minimum requirement

Shipment:

1. We will ship the parts within 1-3 work days after payment confirmation.
2. We can ship goods via DHL/Fedex/UPS/TNT/EMS.Pls tell us which one do you prefer. We suggest DHL for its safe,fast and save advantages.
3. We are not responsible for any accidents, delays or other situations related with shipping company. But we will keep focus on the package tracking.
4. Any import fees or charges are the buyer's responsibility.

5,We are special on the customs clearence for some difficult countries,such as Russia,Brazil, Spain, Turkey and other countries.So you don't worry about the customs problem.

 Refund & Replacement:

We do our best to serve our each customer the best that we can.

 1. 30-days (After Our Delivery Date) GUARRANTEE OF QUALITY.

 2. We suggest customers buy new&original goods, and we don't sell any New& Bulk parts unless the customers need them.

 3. We 100% make sure the good quality of new&original goods. But we can't 100% control the new&bulk parts.

 4. The return back delivery cost of new&bulk parts need paid by buyer witout failure reports. The return back delivery cost of new&original goods with failure reports is free for buyer. 

 5,We can not accept any return or refund if the parts put on board, we accpet the quality return or refund on the warrant time,but the products should keep the same conditon as we shipped.

 6,We don't accept the return or refund for the broken if you use in improper operation.

 Company Information and Contact:

Shenzhen Shijibaike Electronics Co., Ltd. is located in the beautiful city of Shenzhen, which is near Hong Kong, with convenient transportation access. We deal with all kinds of electronic components,parts and accessories. We perfect ourselves comprehensively and enhance our product quality control and pre-sales and after-sales service by our internal management so that we can satisfy demand from new and old customers better and better.

SJBK Electronic LTD

Add: Rm1407, Dynamic World Building, Zhonghang Road, Futian District, Shenzhen, China.www.szbaike.en.china.cn

TEL: 86-755-82771023

Skype: sjbk007