Erisin ES322 7" HD TFT LCD Color Monitor 18 LED CCD Camera

Erisin ES322 7" HD TFT LCD Color Monitor 18 LED CCD Camera  

KEY FEATURES:

This is the newest All-in-One design with Monitor + Camera + Recorder. It has 2 AV inputs(CH1/AV-IN and CH3) and 1 Camera Input for built-in DVR(CH2), which means that you can hook up the monitor to a DVR/Camera/DVB-T/DVD Player etc. It used standard 4 PIN connectors to connect with the cameras which will provide power to each camera attached. U-bracket--easy installation, detachable sunshade design--keep the sun off the monitor, shockproof technology, simpleness connection, nonradiative, low consumption, 12V/24V in all Vehicles

 - 7 Inch TFT LCD color monitor, 16:9/ 4:3 switch freely

 - High Definition: 800*3(RGB)*480 pixels screen (2400Hx480V).
 - AV-IN(DC-Plug) + DC-to-RCA-Conversion Cable (incl.)+ RCA AV Input such as DVR/Camera/DVB-T/DVD Player
 - CH1/CH3(4Pin) + 10m/20m Extension Cable (optional) + 4Pin CCD Camera (optional)
 - CH1/CH3(4Pin)  + 4Pin-to-RCA-Conversion Cable (incl.) + RCA AV Input such as DVR/Camera/DVB-T/DVD Player
 - CH2(4Pin) + 4Pin CCD Camera (incl.) + SD Card (up to 32GB) will become a Car-DVR (Real Time Recorder)

 - CH1(4Pin) and AV-IN(DC-Plug) are using the same CH1, it will replace CH1(4Pin) Input when insert AV-IN Cable

 - Languages, English/German/French/Spain/Portuguese/Italian/Chinese

 - Detachable sunshade design, this sunshade can keep the sun off the monitor

 - It is mounted by a rotational U-bracket, which can be mounted on the dash, roof or anywhere that you find suitable

 - Built in fuse box (No more messy box dangling on the dash)

 - Image can be adjusted for horizontal, vertical, mirror and normal viewing

 - 12V/24V power source, This monitor reverse camera kit can be used with truck/caravan/bus/car

 - One 18LED CCD Camera included, which has better's clarity, color contrasting and sharpness than CMOS camera

 - 4 PIN Connector, which allowing the monitor to power up the camera attached, no need to connect another power cable
 - Built in loud speaker, with AV-IN conversion cable and one 4 PIN to RCA conversion cable.

 - With 3 trigger wires: AV Input(CH1)/Forward for Real Time Record(CH2)/Reversing forRear View Camera Input(CH3)

 - Easy to install- You can DIY as long as you can locate your vehicle's 12V/24V power source

NOTE: This kit comes with only ONE monitor and ONE CCD camera, Please contact us for extra camera purchase