GRP/FRP water tank

Item name

FRP water tank

Techniques

SMC: Sheet Molding Compound

Reinforcing material

Fiberglass, glass fiber and glass mat

Basic Material

Special unsaturated polyester resin

Auxiliary Material

Gel coat resin, firming agent

Accelerating agent and abrasive material.

Parameters

Tensile strength (Mpa): ≥60

Bending strength (Mpa): ≥100

Barcol hardness (Mpa): ≥60

Flexural modulus (Mpa): ≥5900

Water absorption: ≤1.0%

Fiberglass content: ≥25%

Maximum distortion of side wall ≤0.5%

Distortion of the bottom≤8mm

Specification

Water tank size:1.0*1.0*1.0m, 1.0*2.0*1.0m, 1.0*3.0*1.5m, etc

SMC board size:1.0*1.0m, 1.0*0.5m, 0.5m*0.5m

Wall board thickness:5mm,8mm,10mm,12mm,14mm,16mm etc

Measure

0.125-1500m3

Characteristic

1, leak-proof

Due to the material is fiberglass reinforce plastic with high density, adding the sealing tape is high performance with non toxic, so it's leak-proof tank.

2,Long lifetime

Our FRP water tank with maximum distortion of the sidewall is less than 1 percent of the height, maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more or less 30 years.

Application

Our FRP water tank is widely used in factory, Enterprises, government hotel, motel, restaurant, residence as storage facility as well as places with high requirements for water quality, such as hospitals and  food processing plants. Also use it as equipment in drinking water treatment and fire water supply.