Test Instrument

We need LCD display and card for DC resistance test set model HZC-5A. Please quote ASAP.

We are looking for an Exhaust Gas Analyzer 5 Gas for a project with one of our long-term customers. Quantity required: 9 units. The analyzer should be able to measure HC, CO, CO2, O2, and NOx in automobile exhaust gas. It must support general and two-speed idle test functions, have a full English menu, LCD display, auto-zeroing, automatic air-fuel ratio calculation, RS232 interface, plate number and time display, data storage for 500 groups, and a built-in printer. Specifications: temperature -5~40°C, humidity ≤95%, power AC 220V±10% 50Hz, and measurement ranges as per standard. Please provide quotation.

We need to purchase an Automatic Metallographic Grinder-Polisher with a single plate, meeting the following technical requirements exactly or better: - Plate diameter: Ø250mm - Variable rotation speed in both directions - Ability to program and memorize working parameters - Grinding head with automatic locking when plate starts rotating - Round sample holder Ø30mm - Central and individual pressure - Grinding depth control with automatic stop - Integral dispersion system for grinding suspensions - Ring for fixing non-adhesive abrasive paper Ø250mm - Consumables clamping system for abrasive paper and paste on plates - Diamond felt Ø250mm - Gel diamond suspension (1µ, 3µ, 9µ), one bottle each - Aluminum oxide suspension (0.8µ), one bottle Please provide the full technical data sheet, delivery time, FOB price, and standard packing list including accessories. We require strict compliance; any deviation will lead to disqualification. This is an urgent tender request.

We need to procure tri-point caliper stabilizer gauges for oilfield applications. The required sizes and quantities are: - 9" - 15": 3 each - 18" - 26": 4 each - 3-1/2" - 8-1/2": 2 each

We are a quality control laboratory in Argentina and need a quotation for the 50kN Electronic Testing Machine model CMT-50. Our application is tensile testing of copper and brass wire with diameters from 0.8mm to 8mm. Please confirm if this model can test wire samples in this range and advise whether special wire grips are needed. We require the FOB China price for the Type-S version, guaranteed accuracy in the low range of 15-200 kgf, and details on the calibration certificate (including low-range points and annual recalibration support). Also provide estimated shipping cost and delivery time to Buenos Aires, payment terms, warranty conditions, and the technical datasheet.

We are looking to purchase The Modal Shop / PCB Piezotronics Model K9913C High Pressure Calibration Workstation, full configuration including PC controller and calibration software. Please provide: - Price - Technical description - Lead time - Delivery terms (Incoterms 2020) to Hong Kong - Payment terms Are you able to source/supply this equipment?

I am looking for the LZ-642 Portable Teslameter. Please provide product details and quotation.

We are establishing a precast concrete manufacturing plant in Harare, Zimbabwe and need a complete concrete testing laboratory for quality control. The laboratory will be used to test concrete for hollow-core slabs, staircases, beams, columns, foundation blocks, and other precast reinforced concrete products. Please provide a quotation for the full laboratory setup.

I am looking for WIKA pressure gauges, specifically model 232.50.63 and model 130.15. Please provide your best quotation and product details. Thank you.

I need to purchase fuel samplers for installation on pipelines. The requirement is for 4 units of DN80 and 4 units of DN50. The samplers should be made of steel. Please provide an offer for this supply.

I am looking for a 3-axis galvo scan head. I need to know if you manufacture your own galvos or use a third-party supplier. Also, what is the scanning speed in positions per second with ILDA test patterns at maximum speed, without corner rounding?

I am looking for a WIKA pressure transmitter, model S20-3-BG325-HSC3K-A-AGGZZZZWZ. Specifications: - Non-linearity: 0.25% BFSL - Measuring range: 0 to 2.5 bar - Process connection: G 1/2 B EN 837 - Media temperature: -30 to +100°C - Output signal: 4 to 20 mA - Electrical connection: DIN 175301-803 A Quantity: 3 pcs. Please provide your best price and delivery time.

I need a pump for analyzers used in CEMS COGEN applications. Please send details and quotation.

I am looking for a Laboratory Grain Mill. Please contact me if you can supply this equipment.

We need a quotation for supply to Nigeria on the following item: Handheld GPS / Farm mapping devices, quantity 2000 units. Key requirements: - Waterproof - Positional accuracy ≥ 5m - Rechargeable battery - Capable of area and perimeter mapping, coordinate logging - Sized to map and confirm the boundary of a full 1-acre (6-plot) holding per farmer - Must support offline calculations for use in remote areas of Nigeria Please provide pricing and details.

I am looking for pressure gauges. Please provide your best price and delivery time. Thank you.

I am interested in purchasing car electric pen testers. Please provide details on the minimum order quantity and pricing.

We need an industrial digital radiography and computed tomography (CT) system for non-destructive testing (NDT) of composite polymer filling inside heavy-walled steel cylindrical components. The inspected objects are cylindrical, with outer diameter up to 200 mm and steel wall thickness 25–35 mm. The system must include a constant potential X-ray tube with operating voltage at least 450 kV and a high-resolution digital flat panel detector with pixel pitch 100–200 µm. The cabinet must be fully shielded and enclosed, with an automated multi-axis rotary table inside for 360-degree inspection. Required software: 2D digital radiography for express inspection and 3D CT reconstruction for layer-by-layer analysis of the polymer core, with automated defect recognition and void volume/coordinate calculation. Throughput requirement: 40–50 units per 8-hour shift.

I am interested in purchasing WIKA instruments. I need various types including pressure gauges, transmitters, flowmeters, and sensors. I have a detailed list of requirements and quantities. I look forward to discussing the specifications further.

I’m from Vietnam and I’m looking for a durian sorting machine that uses AI and X-rays to inspect the inside of durians. Please send me information about this type of machine.

I am looking for a Junker Vibration Machine to test M10 to M24 bolt-nut-washer assemblies. The machine will be used in our laboratory. I need one set. Please provide your best price and detailed specifications. Thank you.

We are conducting trials for oxygen transmission rate testing of our punnets to meet thresholds for different fruits and vegetables. We are interested in purchasing two sets of an oxygen permeability tester suitable for pharma packaging or similar applications. Please provide product details and quotation.

We need a computer controlled hysteresis graph machine for fully automatic recording and analysis of static hysteresis loops (DC) of soft magnetic materials, intended for observation of the hysteresis curve and magnetic properties of ferromagnetic materials. The required measurement capabilities: - Relative magnetic permeability (µ max) - Coercive force / coercivity (HcB and HcJ) - Saturation induction / saturation magnetization (B sat) - Residual induction / retentivity (Br) The machine must be able to test round bar samples with diameters from 6.00 mm to 20.00 mm, which is our product size range. Please provide a quotation for one set.

I am interested in the bathymetric echo sounder Apache 3 Pro. Please provide details and quotation.