Wear Resistant Material

I need a catalog for bored plates and blind plates made of tungsten carbide.

Liners for refractory brick mold

Inquiry about carbide endmill

I would like to purchase: Carbide Tips Hss Tools, Dice

please let us know if you can offer us the following: 1. Phenolic cotton rods, diameter 130mm x 1000mm length, minimum density 1.58g/cm3 (type 3723, A grade, 10 yarns) a. Quantity = 100 pcs./each month (we estimate a necessary for one year minimum) 2. Phenolic cotton sheets, dimensions 70x1030x2030mm, minimum density 1.55g/cm3 (type 3025, A grade, 10 yarns) a. Quantity = 7 pcs./each month (we estimate a necessary for one year minimum) The minimum accepted densities are according to what we mentioned above: minimum 1.58g/cm3 for rods and minimum 1.55g/cm3 for sheets.

We are interested in your products such as tungsten carbide jaws. 

Im interested in the folding chef knife, if it could be made with a straight edge not corved without the hole. I would be able to use many with this correction.And the whole blade should be straight like after the hole

have you thread insert for oil and gas pipe?