Test Machine

I am looking to purchase the following NDT inspection equipment in one consolidated shipment: - Handheld UV-A LED lamp (365 nm, ≥1,200 µW/cm² @ 38 cm) - Dual UV-A / white light meter - AC/DC magnetic yoke, 220 V / 50 Hz - 10 lb (4.54 kg) yoke test weight - UT calibration blocks: IIW V1 and V2 - 5-step UT calibration block (2.5–12.5 mm) - 100 mL pear-shaped settling tube (ASTM) with stand - Digital gaussmeter (Hall probe, 0–2,000 G) - 3 dry powder bulb applicators - UT thickness gauge with through-coating (echo-to-echo) mode - Magnetizing coil, 11 in ID, AC 220 V Please provide a quotation including prices in USD, courier shipping option (DHL/FedEx) to Mendoza, Argentina, HS codes, lead time, payment terms, and calibration certificates in English.

I need a directional 300 kV X-ray machine for industrial radiography. Quantity: 1 unit. Please provide details and quotation.

I am looking for WIKA Digital Pressure Gauge model CPG1200. Quantity needed: 2 pieces. Please provide your best price and fastest delivery time. Thank you.

I am looking for an LCD display and card for a DC resistance test set, model HZC-5A. Quantity: 1. Please provide the best price, country of origin, unit weight, technical literature, maximum possible discount, and delivery time.

I need one tire testing line for passenger car tires and one for truck tires. Please quote the minimum order quantity and pricing for the tire force and moment test machine and the tire dynamic footprint test machine.

I need a quotation for Yokogawa paperless recorder model GX10-1E/C3, quantity 75 pieces. Also, please include spare parts as follows: input card 3 channels, 15 pcs; power supply card, 15 pcs; screen with keyboard, 15 pcs. Looking forward to your best offer.

I am looking for temperature data loggers that come with software and have at least 4 ports for connecting thermal sensors. The data loggers need to operate reliably in hot environments up to 60°C. Wireless connectivity via GSM or Internet is preferred. I need an initial quantity of approximately 100 pieces.

I am looking for in situ soil resistivity probes designed for use with cone penetrometers. Please provide details on the available models, specifications, and pricing.

We need LCD display and card for DC resistance test set model HZC-5A. Please quote ASAP.

We are looking for an Exhaust Gas Analyzer 5 Gas for a project with one of our long-term customers. Quantity required: 9 units. The analyzer should be able to measure HC, CO, CO2, O2, and NOx in automobile exhaust gas. It must support general and two-speed idle test functions, have a full English menu, LCD display, auto-zeroing, automatic air-fuel ratio calculation, RS232 interface, plate number and time display, data storage for 500 groups, and a built-in printer. Specifications: temperature -5~40°C, humidity ≤95%, power AC 220V±10% 50Hz, and measurement ranges as per standard. Please provide quotation.

We need to purchase an Automatic Metallographic Grinder-Polisher with a single plate, meeting the following technical requirements exactly or better: - Plate diameter: Ø250mm - Variable rotation speed in both directions - Ability to program and memorize working parameters - Grinding head with automatic locking when plate starts rotating - Round sample holder Ø30mm - Central and individual pressure - Grinding depth control with automatic stop - Integral dispersion system for grinding suspensions - Ring for fixing non-adhesive abrasive paper Ø250mm - Consumables clamping system for abrasive paper and paste on plates - Diamond felt Ø250mm - Gel diamond suspension (1µ, 3µ, 9µ), one bottle each - Aluminum oxide suspension (0.8µ), one bottle Please provide the full technical data sheet, delivery time, FOB price, and standard packing list including accessories. We require strict compliance; any deviation will lead to disqualification. This is an urgent tender request.

We need to procure tri-point caliper stabilizer gauges for oilfield applications. The required sizes and quantities are: - 9" - 15": 3 each - 18" - 26": 4 each - 3-1/2" - 8-1/2": 2 each

We are a quality control laboratory in Argentina and need a quotation for the 50kN Electronic Testing Machine model CMT-50. Our application is tensile testing of copper and brass wire with diameters from 0.8mm to 8mm. Please confirm if this model can test wire samples in this range and advise whether special wire grips are needed. We require the FOB China price for the Type-S version, guaranteed accuracy in the low range of 15-200 kgf, and details on the calibration certificate (including low-range points and annual recalibration support). Also provide estimated shipping cost and delivery time to Buenos Aires, payment terms, warranty conditions, and the technical datasheet.

We are looking to purchase The Modal Shop / PCB Piezotronics Model K9913C High Pressure Calibration Workstation, full configuration including PC controller and calibration software. Please provide: - Price - Technical description - Lead time - Delivery terms (Incoterms 2020) to Hong Kong - Payment terms Are you able to source/supply this equipment?

I am looking for the LZ-642 Portable Teslameter. Please provide product details and quotation.

We are establishing a precast concrete manufacturing plant in Harare, Zimbabwe and need a complete concrete testing laboratory for quality control. The laboratory will be used to test concrete for hollow-core slabs, staircases, beams, columns, foundation blocks, and other precast reinforced concrete products. Please provide a quotation for the full laboratory setup.

I am looking for WIKA pressure gauges, specifically model 232.50.63 and model 130.15. Please provide your best quotation and product details. Thank you.

I need to purchase fuel samplers for installation on pipelines. The requirement is for 4 units of DN80 and 4 units of DN50. The samplers should be made of steel. Please provide an offer for this supply.

I am looking for a 3-axis galvo scan head. I need to know if you manufacture your own galvos or use a third-party supplier. Also, what is the scanning speed in positions per second with ILDA test patterns at maximum speed, without corner rounding?

I am looking for a WIKA pressure transmitter, model S20-3-BG325-HSC3K-A-AGGZZZZWZ. Specifications: - Non-linearity: 0.25% BFSL - Measuring range: 0 to 2.5 bar - Process connection: G 1/2 B EN 837 - Media temperature: -30 to +100°C - Output signal: 4 to 20 mA - Electrical connection: DIN 175301-803 A Quantity: 3 pcs. Please provide your best price and delivery time.