INquiry about saw for cutting polymer materials

 We are interested in purchasing a saw for cutting polymer materials. Materials information: Polymer materials of rectangular and cylindrical shape. • The rectangular section of the cut is 80/135 mm. • Cylinder with a cutting cross section of Ø180 mm. The inner hole is Ø 32mm. • ISO 868 SHORE D hardness from 42 to 52; • ISO 1183 from 0.98 to 1.4 kg/cm3 Hardware requirements: - The machine must be equipped with adjustable pneumatic clamps for reliable and accurate fixation of the profile. Automatic feeding of blanks. - The large diameter of the saw blade (at least 450 mm) and movable stops allow you to cut large workpieces. - The machine must be able to adjust the feed rate to adjust the optimal profile cutting mode - After cutting is completed (or in case of an emergency stop), the saw blade automatically returns to its original position (descends into the machine cabinet) - The machine must have a water cooling system, STANDARD ACCESSORIES for a deflated pneumatic pistol. Measuring roller in quantity of 1 pc. (length 1000mm). A saw blade with a diameter of at least 450 mm. - The machine must be provided with automatic coolant supply when cutting workpieces. - Electric motor of at least 4kW, 380V/3F/50Hz Saw blade (diameter/ fit) 450mm/30-32mm Disc rotation speed 3000 rpm Compressed air supply 6-8 bar, 35lit/min We are waiting for your prompt response and commercial offer!