Test Instrument

We need a quotation for supply to Nigeria on the following item: Handheld GPS / Farm mapping devices, quantity 2000 units. Key requirements: - Waterproof - Positional accuracy ≥ 5m - Rechargeable battery - Capable of area and perimeter mapping, coordinate logging - Sized to map and confirm the boundary of a full 1-acre (6-plot) holding per farmer - Must support offline calculations for use in remote areas of Nigeria Please provide pricing and details.

I am interested in purchasing WIKA instruments. I need various types including pressure gauges, transmitters, flowmeters, and sensors. I have a detailed list of requirements and quantities. I look forward to discussing the specifications further.

I’m from Vietnam and I’m looking for a durian sorting machine that uses AI and X-rays to inspect the inside of durians. Please send me information about this type of machine.

I am looking for a Junker Vibration Machine to test M10 to M24 bolt-nut-washer assemblies. The machine will be used in our laboratory. I need one set. Please provide your best price and detailed specifications. Thank you.

We are conducting trials for oxygen transmission rate testing of our punnets to meet thresholds for different fruits and vegetables. We are interested in purchasing two sets of an oxygen permeability tester suitable for pharma packaging or similar applications. Please provide product details and quotation.

We need a computer controlled hysteresis graph machine for fully automatic recording and analysis of static hysteresis loops (DC) of soft magnetic materials, intended for observation of the hysteresis curve and magnetic properties of ferromagnetic materials. The required measurement capabilities: - Relative magnetic permeability (µ max) - Coercive force / coercivity (HcB and HcJ) - Saturation induction / saturation magnetization (B sat) - Residual induction / retentivity (Br) The machine must be able to test round bar samples with diameters from 6.00 mm to 20.00 mm, which is our product size range. Please provide a quotation for one set.

I am interested in the bathymetric echo sounder Apache 3 Pro. Please provide details and quotation.

We need to purchase a Surge Simulator and an EFT Simulator with the following specifications. Surge Simulator: - Complies with IEC61000-4-5 - Open-circuit voltage: 0.5~10KV - Short-circuit current: 0.25~5KA - CDN: model PSUG-CDN-332, 3-phase 5 lines, AC 440V 32A, DC 200V 32A, auto coupling paths L-N, L-PE, N-PE, L N-PE EFT Simulator: - 3-phase, 6KV, 32A - Model: PEFT-05T3 Please provide quotation and delivery information.

I am looking for a UL217/268 smoke box. The product needs to meet the standard requirements as currently constructed. Quantity needed: 1 unit.

I need a quotation for the following item: 1. RTD temperature sensor, metal sheathed. Manufacturer: WIKA Instruments Ordering code: RAF/D/14/R/1/3/HT/14IN OR 350MM Manufacturer part number: RAF/D/14/R/1/3/HT/14IN Quantity: 1 unit Please include in your quotation the unit weight, packaging dimensions, lead time, and shipping cost to my destination. Best regards

I am looking to purchase soil and water testing instruments. I need a total quantity of 500 units. Please provide product details and quotation.

We need a formal quotation for a 12-channel Acoustic Emission system for structural integrity testing on insulated aerial devices and bucket trucks, according to ASTM F914 and ABNT NBR 16092 standards. Required hardware: 1 main chassis supporting 12 channels, 6 dual-channel acquisition boards (10 MHz, 16-bit), 12 resonant AE sensors centered at 150 kHz, 5 low-frequency AE sensors centered between 60–75 kHz, 12 external preamplifiers with 40 dB gain (28V DC), and 12 magnetic hold-down shoes compatible with the 150 kHz sensors. Required software: Full PC-based AE acquisition and analysis suite with real-time multi-channel data acquisition, waveform recording, configurable digital filtering, real-time FFT analysis, parameter extraction, and linear/cluster location modules. Please also include online training, international factory calibration certificate, estimated lead time, and packaging details (gross weight, dimensions) for air freight. We look forward to receiving your Proforma Invoice.

We want to buy the Portable High Pressure Diffuser GC101 SERIES. Please send us a quotation with either air shipping or door-to-door shipping included.

I am looking for a portable homogenizer mixer. Please provide product details and quotation if available.

We are a flour milling company and need to purchase a damaged starch analyzer equivalent to the SDmatic 2. Please provide technical specifications, quotation for one unit (EXW, FOB, and CIF Afghanistan if possible), compliance with ICC 172, AACC 76-33, and ISO 17715 standards, available measurement units (UCD, UCDc, AACC, Farrand, AI%), test repeatability and reproducibility data, delivery time, warranty, and availability of spare parts and consumables. If available, include a comparison report showing correlation between your instrument and the SDmatic 2. Also send photos, brochures, and a demonstration video.

I need a diesel fuel pump test bench, specifically the 12PSDW model. I require a quantity of 12 units.

We are looking to purchase the following SuPCON DCS spare parts, all brand new with one year warranty: 1. Operating Station License Dongle (PRO 111) – 2 Nos 2. Analog Input Module (XP 313) – 3 Nos 3. Analog Input Module (XP 351) – 4 Nos 4. Analog Output Module (XP 322) – 1 No 5. Analog Output Module (XP 372) – 1 No 6. Digital Input Module (XP 366) – 2 Nos 7. Communication Module (XP 233) – 1 No 8. Power Module (XP 258-1) – 1 No 9. Power Module (XP 258-2) – 1 No 10. Network Switch Hub (SUP-2119M) – 1 No Please quote your best price and lead time. We appreciate a quick response.

I am looking for a corona dyne pen for surface tension testing. Please send me product details and your best quotation.

I am looking for RFA reference tubes made of P9 material. Please provide product details or quotation if available.

I need a low-pressure LPG gas regulator with the following specifications: pressure range 14.7-360 mbar, power 70/390 kW, inlet and outlet size 1 inch. I require one piece, together with a pressure gauge and an RS44 ion probe.

We are looking for a quotation for the following equipment to manufacture distribution transformers: - Core cutting and stacking machines - Medium-voltage winding machines - Low-voltage winding machines - Drying ovens - Vacuum and oil filling chambers - Oil filtration machines Please provide your best offer and technical specifications.

I am looking to purchase an SD3000 solenoid tester, the standard model. I rebuild HUEI CAT injectors and need this tester for my work. Quantity required: 1 or 2 units. Please provide details and pricing.

I need the CRM-100 software. Quantity: 1.