Contact Platform Support
Help Center-
I am looking for a fixed knot machine.
India
Posted at: 2026-04-17 18:30:02
******Email:****** -
I need a quotation for an RBD machine. The machine must process wires with an input of 8mm and output ranging from 1.6mm to 3.5mm. I require one unit.
India
Posted at: 2026-04-14 22:30:05S******Email:******
-
We are a university in Brazil seeking a lab-scale wire-processing system to produce wires for additive manufacturing. Our starting material is cast bars approximately 30 mm in diameter and 200 mm in length. We require wires with diameters from 1 to 9 mm and maximum achievable length for use in the WAAM additive manufacturing process. The system must process a wide range of alloys, including Fe-, Ti-, and Al-based compositions.
Brazil
Posted at: 2026-04-10 20:57:45
******Email:****** -
I need spare parts for SCHLAFHOSRT 238, specifically for drum to inside the tubes from spaining or the cones to winding. Quantity required is from 10 to 100 pieces. This is an urgent inquiry.
Portugal
Posted at: 2026-02-15 23:00:02
******Email:****** -
I am looking for a Razor Barbed Wire Machine.
Please share specifications and availability details.
Colombia
Posted at: 2026-01-13 09:20:04
******Email:****** -
I am looking to purchase welding wire wet drawing machines for producing welding wire.
The machines must handle wire diameters between 0.80mm and 1.60mm.
I need 3 units.
Turkey
Posted at: 2026-01-06 17:20:02
******Email:****** -
We need a complete plant setup for manufacturing gold wires with 25um diameter specification. The requirement is for a single-line configuration capable of producing ultra-fine precious metal wires. Please provide technical specifications and compliance certifications for your machinery.
India
Posted at: 2025-09-09 23:10:02
******Email:****** -
Received an inquiry from a client for 2 devices of the “In-line Annealing Machine” required for the production line. Technical information: working principle - non - contact induction heating annealing; suitable for square or round conductor; solenoid inner diameters 15mm and 25mm with internal ceramic tubes; maximum annealing temperature 650°C; temperature control modes: automatic with line speed tracking and local manual control; main power supply and operation frequency to be mentioned; cooling water supplied 150 L/min, inlet temperature below 35°C; device should have touchscreen interface; main equipment dimension to be specified; contract and bank guarantee for minimum 12 months required; complete documentation and software backups to be provided; specify the brand and manufacturer of all equipment and send catalogue and technical specification; determine the price of each spare part separately.
Iran (Islamic Republic of)
Posted at: 2025-08-12 17:01:01
******Email:****** -
We are currently looking to procure an Aluminium 8 Multi Wire Drawing Machine with the following specifications: Inlet Size: 2.0 â 2.5 mm; Outlet Size: 0.2 mm. Kindly share your best offer along with relevant technical details, lead time, and commercial terms at your earliest convenience.
India
Posted at: 2025-05-27 15:14:54D******Email:****** -
We are looking for Copper wire drawing machine with online annealing
India
Posted at: 2025-05-18 17:31:25J******Email:****** -
Inquiry about wire manufacturin
South Africa
Posted at: 2025-05-08 11:00:02T******Email:****** -
******Email:****** -
Inquiry about Reinforced Mesh Welding Machine
Australia
Posted at: 2025-04-23 12:50:05
******Email:****** -
We need to purchase a wire drawing machine to be used on copper
United Kingdom
Posted at: 2024-05-30 16:08:21K******Email:******
Home
> Metal Drawing Machinery
