Industrial Equipment & Components

We require white cement clinker meeting specific specifications. Key requirements include: Fe₂O₃ max 0.5%, MgO max 1.5%, SO₃ max 2%, whiteness not less than 87%, free moisture max 0.5%, silica modulus min 2.80, LSF 88%-98.5%, liter weight 1150-1300 grams. Physical appearance must be greenish/bluish white nodules of 1-10 mm size. Compressive strength when ground with 3%-6% gypsum: 3 days min 200 kg/sq.cm, 7 days min 270 kg/sq.cm. Packing in 1.5 MT jumbo bags. Please provide your best FOB offer.

I need to know the price for a 50m³ biogas storage bag. Please provide details on cost and availability.

I am interested in purchasing water purifier bottles. Please provide the capacity in liters. Also, share the minimum order quantity.

We are looking for Gardner Denver compressor parts. Specific models required include GF160290-1-VS, GS160290-3-VS, A11976674, EK220-1, GSGD10-2-N, and GMGD10-1-N.

I need a quote for a 20kVA solar parabolic collector complete system. I plan to purchase one or two sets.

I need a quote for oil processors for transformer oil purification, handling mineral oil and FR3 oil. I require one unit with 200 L/min capacity and one unit with 50 L/min capacity. Key specifications include voltage of 460-480V 60Hz, 1 micron filtration capacity, vacuum level between 5-10 mbar, and oil temperature range of 60-70°C. Please provide details if you have models matching these specs or similar.

I want to order control valves #7 and tips for electronic nozzles. Please provide product details and specifications.

I need a quote for electro galvanized coil roofing nails, size 1 1/4 inch. Quantity required is 2000 boxes, fitting one container. Please send your best offer.

I need semi-automatic soldering stations equipped with a microscope, flux/solder dispenser, and temperature control for precise soldering of SMA and N connectors' central contacts. The temperature control range must be 90 – 450 °C.

I need DENSO parts for Hino vehicles. Please provide details based on your offerings.

I need a mortar plant for my project. Looking for reliable suppliers to provide a quotation and specifications.

I need to purchase one Eaton Airflex 4CB200 air clutch.

I need a used or refurbished water chiller, either model ICW180 or ICW240, and an iceplant model 43T with ice storage capacity of 75 tons. Quantity: 1 unit for the chiller and 1 unit for the iceplant.

I need vibratory motors with specific models and specifications: - Model ZFB/LZF-10: 10KN, 0.75KW - Model ZFB/LZF-15: 15KN, 1.1KW Required features: 380V, three-phase, 1500/3600rpm. Quantity: 2 units for each model.

I am seeking a waste oil burner model STW120-P for industrial applications. It must be double stage and preheated to handle high viscosity fuels such as waste engine oil, waste gear oil, and used cooking oil. Required heat output is 15 to 50 kW. Essential features include an integrated heating tank for cold starts and a built-in air pump to avoid external compressors. The nozzle type should be siphon for heavy oil, with power supply at 220V / 50Hz. Safety features must include a flame sensor, overheating protection, and low-oil level sensor.

I want to purchase the TKSA 31 SKF shaft alignment instrument. Please provide information on availability and pricing.

I need lances for my electric power washers model BY02-VBC-WT. I have four units, and the existing lances are cracked. I want to purchase four replacement lances.

I need a quotation for the longest available disabled handle suitable for 35 mm cartridges. The first order quantity will be 500-1000 pieces.

I need Bosch DLLA 145 P 2230 nozzles and Bosch DLLA 145 S 1330 nozzles. For the S 1330 model, it must have a rough surface at the top, similar to the image provided.

We are looking to purchase compost membrane covers with specifications: 54m × 10.8m, 34m × 10.8m, and 20m × 10.8m. Performance must meet GORE Cover System standards. Required documents and details: - Technical passport including air permeability, waterproof performance, water vapor permeability, tensile strength, operating temperature range, service life, and warranty period. - Third-party inspection report from an accredited laboratory. - FOB Qingdao quotation. - Delivery time. - Payment terms. - Past customer reference list. - Samples (minimum 500×500mm with stitching for independent lab testing).

I am interested in purchasing centrifugal water curtains, specifically the JRM-ZS1918-85 model. I require a quantity of 56 pieces. Please specify the price in Chinese Yuan (CNY), including VAT, on EXW terms. Payment will be made through an agent in China. Additionally, send the technical documentation for the specified models with a detailed description of the installation work.

I need spare parts for a vertical cryogenic pump. Specifically, I require labyrinth seal assembly or wear parts. I am open to aftermarket replacement parts and can provide drawings or samples for manufacturing.

I am looking to purchase centrifugal exhaust fans. Specifically, I need models BF-800P-30kW, GF-1000P-37kW, and GF-600P-11kW, each in quantity of 1. Please share product features and brochure.