Heat Insulation Material

I am interested in purchasing VPI Mica Tape.  
The required specifications are thickness of 0.13mm and minimum width of 200mm, in roll form.  
I need one roll.

I need rubber insulation products with the following specifications:  
- Thickness: 100 mm  
- Density: 40–60 kg/m³  
- Thermal Conductivity: ≤ 0.037 W/m·K  
- Fire Rating: Non-combustible, Euroclass A1  
Purchase quantity: 1200 square meters.

I am interested in purchasing flexstrip jumpers.  
Please provide details on availability and pricing.

I am looking for 100% pure camel hair fabric.

I am seeking a qualified manufacturer for electrical insulation fiberglass adhesive tape with UL approval.

Product specifications:
- Backing material: Fiberglass (glass cloth)
- Adhesive: Acrylic
- Thermal class: UL Class B – 130 °C
- Thickness: 0.08~0.12 mm
- Width: 15 mm
- Length: 30 m per roll
- Application: Motor / transformer electrical insulation

Compliance requirements:
- UL Recognized product
- TDS product

Commercial requirements:
- Quantity: 400–500 rolls per lot
- Please quote FOB price per roll and CIF price per roll (destination port: Cat Lai, Ho Chi Minh City, Vietnam)
- Lead time for first shipment
- Production capacity per month

Samples:
- Confirm available sample quantity for testing
- Courier cost will be covered by us.

We are currently looking to purchase ceramic insulators. Please advise your best delivery time.

I am interested in purchasing glass wool and rock wool for our refrigeration and air-conditioning projects.  
Please provide your best prices per unit and minimum order quantities.  
If available, also share your catalog and specifications.

I am looking to purchase XPS foam sandwich panels.  
Specifications: size 3 feet by 5 feet.  
Quantity: 1000 pieces.  
I need the wholesale price per square foot.

We require 20 densite eps strafor blocks for new projects.  
We request a price quotation with two alternatives:  
First, based on a 20-foot container (internal volume: 33 m³).  
Second, based on a 40-foot HC container (internal volume: 77.6 m³).  
Both should be on DDP basis.

I need to purchase self fusing silicon tape with specifications 25x0.5x10MT.  
Quantity required is 100 rolls.  
Please share the Technical Data Sheet (TDS).

I am interested in purchasing airgel for insulating gasoil tanks in outdoor refineries. Please confirm availability.

Hello,  
I require dense mineral wool for interior use between metal studs with a density of 120kg/m2.  
The purchase will be for a full 40-foot container of mixed products.

I need to purchase three-phase insulators with the following specifications:  
Dimensions: Length D: 130 mm, Outer Diameter: 130 mm.  
Bolt holes: One centered M16 hole for mounting, four M12 holes with 40 mm center-to-center spacing.  
Included bolts: Six sets of M16×36 bolts, twenty-four sets of M12×80 bolts.  
Material: Steel grade 8.8.  
Quantity required: Six pieces.

I am looking to purchase 160N insulators and 310N insulators.  
Specifically, I require 2520 suspension insulators and 1260 tension insulators.

I am looking to purchase dehaired cashmere fibre.  
I require an initial quantity of 50 to 100 kgs.  
The micron quality must be 16.0 - 16.5 mic.  
Please provide the final quote price.

We are interested in purchasing FR4 fiberglass reinforced epoxy laminate sheets.  
Specifications:  
Thickness: 4.0 mm and 10.0 mm  
Size: approximately 1200 mm × 1200 mm or 1000 mm × 2000 mm  
Quantity: 500 sheets for each thickness.

I require rock wool insulation for purchase.  
The thickness must be 195mm.  
The quantity should fill a 40-foot container.]

I need a quote for cellular glass blocks with specific models and sizes.  
Details:  
- 8.253 pieces of HLB-800 block in size 18"x24"x6"  
- 9.726 pieces of HLB-1600 block in size 18"x24"x7", including filter and vapor barrier.

I need a full container of cellular glass shipped to Sokha, Egypt. Specifications include thickness of 18 cm and density of 120 kg/m³.

I need to purchase 11kV line post porcelain insulators with hardware including studs, nuts, washers, and tie top type.  
They must comply with IEC 60060, 60071, and 60720 standards.  
Key specifications: minimum creepage distance of 300mm, insulator height of 250±20mm, shank length of 165mm, and failing load of 8kN/10kN.  
Test reports from a certified laboratory are required.  
Quantity needed is 3250 pieces.  
Full details can be provided if necessary. Urgent response is appreciated.