Industrial Equipment & Components

I need to purchase spools with the following specifications:  
- Diameter: 750-800 mm  
- Core: 250-300 mm  
- Inner core: 20-56 mm  
- Distance between flaps: 15 mm  
The annual quantity required is 200 pieces.

I require brush holders for DK 117 motors.

I am looking to purchase water coolers that include a built-in filter. The coolers must be compatible with tap water and feature a filtration system, with a capacity of up to 15 liters.

I require a quantity of 2000 pieces.

I am looking for round stainless steel serving bowls with lids.  
Material must be SUS304 stainless steel with a mirror silver finish.  
Diameter should be approximately 30-35 cm.  
Preferred minimum order quantity is 30-50 pieces.

I need a vertical wind turbine for residential energy generation to supplement my solar panels during low sunlight periods. The unit must have a power output of 3-5 kW and be compatible with my existing inverter. Initially, I will purchase one unit for a pilot test. If successful, I may order 8-10 additional units in a follow-up phase. Shipping is required to Madrid, Spain.

I need racing go-kart tires for import.  
Specific sizes required: 10X4,5-5 and 11x7,10-5 with 65 hardness.  
Also seeking rain tires in same sizes and cadet sizes: slick and wet 10x4-5 and 11x5-5.  
Order volume is several full containers per year.

I am interested in starting to sell portable dryers in Morocco. I need more information and real pictures of the products.  
I plan to purchase 5 pieces as an initial trial. If the results are good, I will increase the quantity for larger orders.

I am interested in purchasing nanocrystalline strip or common mode iron core.  
Please provide details based on your offerings.

I need a quotation for fasteners. Please include the following details:  
- Estimated weight and dimensions.  
- Lead time.  
- Brand and country of manufacture for each item.  
- Manufacturing standards and specifications.  
- Technical sheets or catalogs.  
- Material test reports, quality or conformance certificates, with any extra costs specified.  

Also, provide shipping cost to Miami, FL 33166 or CIF to Viru Viru Airport, Santa Cruz, Bolivia. Indicate FOB or EXW terms for us to calculate logistics costs to Bolivia.  
Thank you for your prompt response.

I am looking for breathing air compressors that comply with EN 12021 or Grade D standards.

I need a full set of ink rollers for Heidelberg XL 75.  
Quantity required: 10 pieces for one section.  
Requirements: Made from high-quality materials.

We are interested in purchasing horizontal rotation turbines.  

I want to purchase a boiler.  
It should have a capacity of 12 tons, use fluidized bed technology (pFB), and be capable of burning wood chips.

I require details for purchasing electrical components, including 2 units relay, switchgear 6KV, MLPR 610-HB, and PT switching.  
Please provide information on price, delivery time, estimated weight, datasheet or catalogue, and COM/COO incoterm EXW.

I am looking for a Xylem bare shaft pump model e1610 2.5D 15kW 4P.  
Quantity: 1 unit.  
Application: for water, with temperature up to 50 degrees Celsius.  
I need a quote, data sheet, and delivery period.

I need to purchase pneumatic rubber fenders for marine use.  
Required specifications include size length 2000 mm x width 1500 mm with chain tyre.  
Quantity required is 4 units.  
Destination port is Singapore.

I am looking to purchase one diesel injection pump model 16700VW201 for my Nissan Urvan 3.0 with ZD30 engine.  
I need to confirm if it is new or refurbished and the shipping cost to Uruguay.  
Additionally, I require compatible injectors for this pump and vehicle.

I am looking to purchase a complete end-to-end LPG cylinder production line.
It should include all necessary components.
I will review available options to choose what suits my needs.

I am looking to purchase biogas digesters.  
I need a capacity of 1000 cubic meters, made of MS sheet.  
The purchase quantity is approximately 5 to 6 units.

I need an oil metering pump.

I want to purchase Flow Restrictor 200cc for RO systems.  
Minimum order quantity is 100 units.

I need a quote for one unit of oil gear power unit pump model PVG-075-F1UV-LSFY-P-1NN/FSN/1183.  
Please include air freight cost and lead time to Zambia in the quotation.

I am planning to purchase ball screws.  
I need 2 pieces for the initial order.  
There are no specific requirements.

I am looking to purchase butchery equipment for a new butchery. I need the whole set of equipment.